Everything posted by mgray04
- abs!
-
abs!
Hi guys. My abs light keeps intermittently flashing when I'm driving. And the Rev and speedo needle keep dropping to the bottom stayin there for couple of seconds the rising back up!! Don't know if this is due to the same problem!? Help!?
-
hub!!!
I need a nsr hub for my 1997 impreza Classic turbo urgent!
-
1995 impreza type ra breaking
Near side rear hub?
-
1996 Impreza Sport AWD Breaking for spares
Is this turbo. I need. Nsr hub. Cheers
- idle issue
-
idle issue
Right I'll try that then. And see if it stalls :)
-
idle issue
And if it stalls that means it's not working?
-
idle issue
I wouldn't of thought it's normal for the revs to drop to 0 and nearly cut out
-
idle issue
Wouldn't that of put the engine light on though?
-
idle issue
No mate. Would that effect it
-
idle issue
When I dip my clutch to pull up to lights, junction etc. The revs drop right down to nearly 0. Then the car revs back up to normal idling revs. It sits fine on normal idle/tock over. It's only when I dip the clutch when driving. Any ideas?
-
dial dropping off?...
It's only when when you dip the clutch. If you leave it to idle its fine
-
dial dropping off?...
Loud though***
-
dial dropping off?...
The revs do aswell slightly. It never cuts out though. Seems to be running ok. I can't hear it mis firing. The exhaust is so loud too lol
-
gauge should be at?
So about -0.8 on idle. And when your driving 0.8? Obv when you boot it it'll go right up to the top?. (my first turbo)
-
gauge should be at?
Hi. Just a query. What should a turbo boost gauge sit at normally? I have a gc8 impreza turbo. If read if it goes up and straight back down it has a leak?
-
dial dropping off?...
Gc8****
-
dial dropping off?...
My rev counter is acting weird. This is my first Subaru so don't know if it's normal. When I dip my clutch to stop at lights etc. The rev counter drops down to alMost 0. Then quickly jumps back up to idling speed. (around 900) help? I have a 1997 gr8 impreza turbo
-
interior lighting!...
There's the dash obviously the heater controls and that's it. There's no lights for the door switches etc. Just wondered if some could be fitted
-
bearing
Anyone changed a rear wheel bearing on a impreza classic. If so, difficulty? Anything need to replace. Bolts etc
-
interior lighting!...
Just can't see anything in the dark. So annoying
-
interior lighting!...
Hi guys. I have a 1997 impreza gc8. The interior lighting is little to none at night!! I can't see the window switches the door handles! It's so dull! Anyone have any mods? Etc
-
classic
So u can remap the standard ecu? Lol
-
classic
Cheers for all that advice. Fantastic!! Fitting for an ecu? Surely they just swap over can't be Much fitting needed lol