June 10, 201510 yr Hi, So I've just tried to remove my dump valve and re fit the re circ valve but I can't seem to find the hose the the valve fits to. Could this have been removed? And help or maybe a pic would help. Thanks in advance
June 10, 201510 yr Normally it will be below and slightly to the left of the dump valve position shown by the silver blanking plug in this pic... Sent from my SM-N9005 using Tapatalk
June 10, 201510 yr The hose comes from the inlet hose (to the turbo) and comes up just under the dump valve. It will either be removed and blanked at the inlet or kept in place and blanked off as can be seen in the picture above.
June 10, 201510 yr Author Hi I've found the pipe it's blocked off at the large intake pipe. One more thing,I've just found this pipe connected to nothing.
June 12, 201510 yr Author No ideas guys. Small air line going nowhere. There is a connection at the top of the unit that goes into the loom. It's connected by the wires but the hose goes nowhere.
June 12, 201510 yr Looks like some sort of solenoid, does it pull a vacuum when running/loading the engine.
June 12, 201510 yr Just had a thought could be purge solenoid valve for the fuel system is it on the right side of the engine bay next to the filter. If it is may have been blanked of or left disconnected by someone not knowing what there doing
June 15, 201510 yr Author Yes pal its on the right side next to the fuel filter. Do you know where it should go?
June 15, 201510 yr With out looking no I've got a classic so it's a bit different but if look around the manifold you may find a pipe that's been blocked off etc
Create an account or sign in to comment