Swoggles Posted November 20, 2015 Share Posted November 20, 2015 I have a 05 wrx and have collected parts to get an sti wing on. I have the boot lid and spring from an sti and recently got a used spoiler. I cant find a fitting kit anywhere so whats the best way to fit it and avoid leaks? I thought of getting some thin adhesive weather proof foam i saw on eBay. But i dont know what size would be best and how much i would need. Would I need it to run around all of the base plate? Cheers! Quote Link to comment Share on other sites More sharing options...
martyc Posted November 20, 2015 Share Posted November 20, 2015 If you're planning on keeping it on tiger seal is amazing stuff Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
aucky Posted November 20, 2015 Share Posted November 20, 2015 when i changed my wrx spoiler to sti on my blob the spoiler came with,it looks just like draft excluder tape,its about 10mm wide,sticky 1 side and sponge on the other,can buy it from wilkos in rolls,look on underneath spoiler and you will see a type of channel just in from the edges,just tape it in their then bolt spoiler on and your good,it squashes down n dont leak. Quote Link to comment Share on other sites More sharing options...
Swoggles Posted November 20, 2015 Author Share Posted November 20, 2015 I intend to keep it on but i don't fancy tiger seal, dam good stuff but a bit to permanent. Thats the stuff i was thinking off, its an abs rep so i will have to check it has that channel in it. Does it matter how thick it is? I was going to go for 1mm? Quote Link to comment Share on other sites More sharing options...
aucky Posted November 20, 2015 Share Posted November 20, 2015 stuff i used was about 5mm then you no it squashed down,gives a bit protection for the paint as well,1mm i would say is a bit thin,if it dont have the channel just put the tape about 5mm in from the edge then it wont show. 1 Quote Link to comment Share on other sites More sharing options...
Swoggles Posted November 20, 2015 Author Share Posted November 20, 2015 I will get some over the weekend ready! Cheers for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.