P99KMB Posted February 24, 2016 Share Posted February 24, 2016 2010 Legacy Mkv Estate. 2.0 Diesel. on 53k Front end gone a bit rattly on uneven surfaces. Quick look seems anti roll bar bushes seem a bit "rubbery" and would like to replace with poly bush, also do Drop links at same and probably track rod ball joints. Not planing to do wishbone bushes unless are completely shot! However scouting around web for the parts I am utterly confused by descriptions of suppliers as they keep coming up with Legacy/Outback/Forester for parts and often no mention of model or nothing for 2010 models onward. Also some prices when find an apparent part, are galactic to the point of stupidity (£99.99 for drop links!!! Come on). Anybody out here know a good supplier on net or if in Oxfordshire/Wilts/Berks to go and collect? Thanks in anticipation. M80KMB Quote Link to comment Share on other sites More sharing options...
tom_gr7 Posted February 24, 2016 Share Posted February 24, 2016 If you wanted OEM parts, you could always check out import car parts. - http://www.importcarparts.co.uk/parts?cat=96&sub=3421 You could also check out Whiteline for some uprated droplinks, although these may be pricey. http://www.whiteline.com.au/index1.php Quote Link to comment Share on other sites More sharing options...
P99KMB Posted February 24, 2016 Author Share Posted February 24, 2016 Thanks. ordered drop links from import parts as they stated defo for Legacy of my year. Still struggling on sway bar bushes though. whiteline are USA based and again model derivations unclear...seems lot of confusion between Outback & Legacy as specific models or are the parts interchangeable?????? Think I need to measure diameter of roll bar and look for appropriately sized bushes as opposed to model specific ones....ball joints look pretty much available anywhere.. Cheers for the help. Quote Link to comment Share on other sites More sharing options...
tom_gr7 Posted February 24, 2016 Share Posted February 24, 2016 hi, yeah i got my droplinks from ICP. I also got new bushes from them too. Like you i did want poly bushes, but it looks like a right chew trying to find the right sizes n what not, so just went for OEM ones. Wont last as long, but they are cheap so its okay. . Are the sway bar bushes the D bushes? I got some from ICP, maybe you could have a look on ICP for the D bushes for your car as it will tell you the correct size? I'm afraid i have little to no idea about the parts being interchangeable, i just tend to buy from ICP as you can check if it definitely fits. Edit have you checked Scooyworld? http://scoobyworld.co.uk/catalog/index.php?cPath=39_274_325_364&osCsid=lt5ddecisu4vdhbhae3jle2ee2 Quote Link to comment Share on other sites More sharing options...
P99KMB Posted February 24, 2016 Author Share Posted February 24, 2016 SuperPro Poly 20mm Front ARB Car Anti Roll / Sway Bar Inner Bush Kit SPF3096-20K (Fits: More than one vehicle) Found these on eBay if any interest? Poly bushes. they say they will fit my motor and chart backs it up..... Quote Link to comment Share on other sites More sharing options...
P99KMB Posted March 8, 2016 Author Share Posted March 8, 2016 Damn.........................poly bushes too small!!!!!!!!!!!!!!!! Do not compress fully around the ARB when clamps bolted up, leaving a gap in bush. Reckon I need to use some calipers to determine diameter of Anti Roll Bar then go make enquiries on web. anybody any thoughts or recommendation of suppliers? Quote Link to comment Share on other sites More sharing options...
john.c Posted February 8, 2020 Share Posted February 8, 2020 WWW.BROOKS-BRD.CO.UK BASED IN KIDDERMINSTER MADE ME A SET OF ANTIROLL BAR POLYBUSHES VERY REASONABLE GAVE HIM SIZE OF MY BAR AND THEY HAVE BEEN ON CAR OVER A YEAR NO PROBLEM. LOU BROOKS IS THE MAN TO SPEAK TO. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.