LUIGI-3 Posted January 19, 2014 Share Posted January 19, 2014 soon will come time for cambelt being done. now wondering which kit to get? found this on eBay http://www.ebay.co.uk/itm/Impreza-2-0-NA-Sport-GX-Timing-Belt-Kit-Dayco-Cam-Belt-2000-To-2005-EJ201-/281237904844?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3ASubaru%7CModel%3AImpreza&hash=item417b15ddcc#ht_2188wt_986 seems good price. defo not paying 400 quid what i was quoted by stealers. and found this water pump http://www.ebay.co.uk/itm/VC4-Water-Pump-Subaru-Impreza-2-0-Petrol-GX-02-03-11-05-Saloon-/350717339446?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item51a861e736#ht_2029wt_1029 do i have to change crank shaft seal as well ? Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 19, 2014 Share Posted January 19, 2014 Pop on here mate I did ask if they would come an advertise here with the hope they would help with parts or with any club discount but I did say wasn't needed, with any advise would have been welcome as stated but they said no :( But best people to try. And say we sent you. You never know enough people do they might get the hint ;) http://www.importcarparts.co.uk/parts.asp And might remember my email :D 1 Quote Link to comment Share on other sites More sharing options...
LUIGI-3 Posted January 19, 2014 Author Share Posted January 19, 2014 Mate you are an absolute legend :) awesome- its like 50quid cheaper then egay, cos i dont have to pay VAT living in Jersey hihi 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 19, 2014 Share Posted January 19, 2014 No problem the more you use them the better the discount they are good I was just hoping to get them involved here as me and I know a few others have used them. I just think pester someone long enough like I did my missus they will crack and give eventually to the powers of Rophenol.... 1 Quote Link to comment Share on other sites More sharing options...
Exup1000 Posted January 19, 2014 Share Posted January 19, 2014 Kit looks fine mate.when I done mine, the subaru place ( subaru 4u ) where I got It from.said you don't need anything heavy duty unless your going over 400 bhp,obviously I got a standard kit.i changed my oil seal (one behind the pulley wheel) as their known to leak and i had one! my thermostat ( for a couple of quid you may as well) and all the pulley wheels/ tensioner.I say "all" as I've heard of people just doing the belt which doesn't make sense to me. anyway I also changed the oil cooler crossover pipe as mine was rusty, so give it a good inspection.hope this helps mate. What's up with your water pump? 2 Quote Link to comment Share on other sites More sharing options...
Exup1000 Posted January 19, 2014 Share Posted January 19, 2014 Importcar have a load of stuff but they won't deliver to me ? I even emailed them and they messed me around. I think it's coz I'm southern....... Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 19, 2014 Share Posted January 19, 2014 You're just too dam sexy mate that the problem Quote Link to comment Share on other sites More sharing options...
LUIGI-3 Posted January 19, 2014 Author Share Posted January 19, 2014 Kit looks fine mate.when I done mine, the subaru place ( subaru 4u ) where I got It from.said you don't need anything heavy duty unless your going over 400 bhp,obviously I got a standard kit.i changed my oil seal (one behind the pulley wheel) as their known to leak and i had one! my thermostat ( for a couple of quid you may as well) and all the pulley wheels/ tensioner.I say "all" as I've heard of people just doing the belt which doesn't make sense to me. anyway I also changed the oil cooler crossover pipe as mine was rusty, so give it a good inspection.hope this helps mate. What's up with your water pump? this was standard kit they quoted me for and my car is non turbo, so that was bit steep, nothing wrong with pump mate just thought its normally done all in once with cambelt Quote Link to comment Share on other sites More sharing options...
Exup1000 Posted January 19, 2014 Share Posted January 19, 2014 That's cool, mate you've got the right train of thought.i'e when you've got it all stripped out you may as well do it all, saves you going back in there in the near future.i also changed auxiliary belts on mine and oil/ filter change due to changing the seal. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.