Danpow Posted March 13, 2016 Share Posted March 13, 2016 So a few weeks ago I've had an issue start with the Scooby. I get a horrible grinding noise when I put my foot on the brakes and it sounds/feels like ABS. It's constantly there when I brake for the first 5 - 10 minutes of driving then the ABS light comes on, this then stops the noise all together for the rest of the drive. The ABS light is sometimes accompanied by the handbrake warning light too, which adds to my confusion! The noise then starts again every time I stop and start the engine. My brakes were in need of changing so I've changed both front and rear discs and pads so that's eliminated brakes as being the issue. While changing the brakes I checked all ABS sensors for any breaks in the cables and air blasted the areas to clear any debris that may have been there. But to my avail still nothing :( Has anyone else had this issue or can shed some light on this? It's having my eye out! Thanks! Quote Link to comment Share on other sites More sharing options...
Phila67 Posted March 13, 2016 Share Posted March 13, 2016 I have read somewhere that slotted discs (if that's what you changed to) can cause some peculiar problems? Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Danpow Posted March 13, 2016 Author Share Posted March 13, 2016 Hmm, thats interesting. I changed to OEM equivalent mintex discs and pads, and yes they were slotted. Any idea where you read about these? Could be worth me looking up. Quote Link to comment Share on other sites More sharing options...
Danpow Posted March 16, 2016 Author Share Posted March 16, 2016 **Going to keep this thread updated incase anyone else gets stuck with the same issue** Found a guy in the states that's had a similar sounding issue, his turned out to be a cracked ABS ring! I won't get time to take a look at it now until a few weeks time so until then I've pulled the main control fuse from under the bonnet just to turn off the ABS completely. (fuse is located in the main fuse box under the bonnet and is SBF-8 in the diagram attached) I've got the ABS light on constant now as a result of the fuse being out but the crunching/grinding noise has gone so that's good! I know this is not a good fix but it will only be short term. I'll update as to how i get on with the ABS rings in a few weeks! Quote Link to comment Share on other sites More sharing options...
Gaulson Posted March 16, 2016 Share Posted March 16, 2016 Yes I would try the abs rings. I had the same problem in my old Hyundai Accent, everytime I braked the abs would go mental on me and it turned out to be a hairline crack in an abs ring :). Hope you find the problem! 1 Quote Link to comment Share on other sites More sharing options...
Danpow Posted March 16, 2016 Author Share Posted March 16, 2016 Thanks man, hopefully this will solve it! Sent from my Nexus 6 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.