PullenFoz99

As you can see via title of post that I’m selling my set of used jdm cylinder heads, you can see via pictures that they are in good condition no cracks. originally bought them for a build but have decided to take a different direction. wanting £1400 but open to offers. collection preferred but willing to send at buyers expense.

ENGINE NOW SOLD

Hi, After a little advice and hopefully someone can help🤞 I’m rebuilding my 99 Forester stb and I was wondering if anyone on here has ever relocated the A/C compressor? im moving my battery to the boot and was wondering if the space left in the engine bay by battery could be used? I’m installing a rotated inlet manifold so alternator will be pushed over but Would really like to keep the a/c in the car. any help/advice would be appreciated. cheers

NOW SOLD:)

Hi, I have an EG33 engine for sale, the cylinder heads have been separated from the block as engine had a head gasket issue, I have engine loom as well. Can post pics if anyone’s interested. Looking for £750 Thanks

NO LONGER FOR SALE, THANKS

SORRY JUST REALISED IVE POSTED THIS IN THE WRONG FORUM, ITS NOW IN THE FOR SALE FORUM.

Hi, I have 4x brand new knuckle/hub assemblies for sale, genuine subaru parts, 5x100 pcd hub, bearings, Abs rings, I also have the back/dust plates for them but unfortunately they weren’t fitted when knuckles were assembled due to the person fitting them forgot! If anyone’s interested let me know. Thanks in advance.

Hi, I have 4x brand new knuckle/hub assemblies for sale, genuine subaru parts, 5x100 pcd hub, bearings, Abs rings, I also have the back/dust plates for them but unfortunately they weren’t fitted when knuckles were assembled due to the person fitting them forgot! If anyone’s interested let me know. Thanks in advance.

Hi, I have a brand new set of front driveshafts that I brought for my JDM 1999 Subaru Forester stb. Part no. 28021AC281 As I believe these are the only two brand new shafts in the country and possibly Japan as one of the shafts were imported in thought subaru uk as the last in stock in Japan and they are now discontinued. Believe me I searched for ages before going though subaru uk... i also have a rear right shaft part no. 28021FC000 this shafts fits a R160 for sale. if anyone’s interested either message me on here or email me: [email protected] Driveshafts are advertised on another site. Collection preferred but willing to post with added fee. Thanks

Thanks Savage Bulldogs will message JTinnovations straight away👍

Hi all, After some help, I own a 99 Forester stb which I’m currently stripping the engine out of and I have just got some JDM single AVCS cylinder heads. Now my current engine has a coil pack on the Inlet manifold but my new cylinder heads take the coil pack on plug set up! So can I convert to coil on plug? If so how do I go about it or is there a conversion kit I can buy. Thanks in advance for any help.

It’s git a blitz air induction cone and as far as I’m aware it’s not been mapped or tuned in any way? If bores are scored what’s the most cost effective solution, re honing or new engine?

Hi, spark plugs have the same part number.

Hi Tidgy, Looking to do that next and then go from there. just thought I’d add a couple of pics which show what the spark plugs that I removed look like. cheers

Hi Savage Bulldogs, Thanks for replying. Mine is an ej205, when I removed the spark plugs they were all a little wet and on two of them the electrodes were half the size? car has been running a little rich I think as the smell of fuel has become more apparent recently. So possible rings? Cheers Wayne

Hi all, Was hoping for some advice/ help, I’ve recently carried out a compression test on my 1999 Subaru Forester stb and was a little concerned about one the readings, can anyone shed some light or is it nothing to worry about. Readings: Cyl 1@155 (concerned reading, is it to low compared to others?) Cyl 2@168 Cyl 3@160 Cyl 4@165 any advice/help given will be greatly appreciated. Thanks

Hi, I ended up welding section in it👍 Thanks for the help

Hi, Does anyone out there know the part no. for all 4 complete driveshafts as mine are covered in rust and I can’t find any part no’s at all!! And without them I’m struggling to find replacements. My Foz is a 1999 v Reg if that’s any help. Any help/ Advice will be welcome. Thanks Wayne

Hi, CAN ANYBODY HELP! Im trying to find a 3” catpipe 200cpi to fit my Forester s/Tb but I’m really struggling to find one, I was told that a 2000 Impreza wrx sports cat would fit but it’s 6” to short. Has anyone had the same issue, if so what’s the solution. Any help would be most appreciated. Thanks Wayne

Hi, Wondering if anyone could give me some help. I need a Cat Pipe section for my 99 Foz stb but can’t find anything, I’ve read online that exhaust systems from 2000/2001 Impreza wrx fit bar the back box due to length. is this true? Has anyone done this? Cheers

Thanks for the reply, bleed the slave cylinder and it’s sorted the issue👍

Hi All, So I have a couple of questions and was wondering if anybody could answer them? Firstly I’ve just had a new 3 piece clutch fitted and for some reason the peddle sticks halfway! I can still change gear even tho the biting point is right at the bottom ( basically as soon as it leaves the footwell) which it didn’t do before? Any ideas... Secondly I want to fit some deep concave ally’s to it, 18”x 9.5 and was wondering if anyone on here has done this if so what work was needed to arches etc. Thanks Wayne