bowthruster

so its a forge or hks for a newage 2001 onwards then?

So what would you sugguest then matt?

Ive got a baileys d/v on the standard cooler at the moment,where do I get a compatible plate from and how much do they cost.I have the y pipe as well.Thanks

OOps I meant alli?

Oh dear conflicting answers... Do any of the diy shops sell angle iron? to make these brackets up

Cheers.Typical-not straight forward then.I might wait till ive got a tdo5 then fit everything all at once.

Its off a bugeye matt

Hi and welcome

Going to spray the new intercooler tomorrow then install it.Apart from trying to find some angle to make a bracket up,is it straight forward to fit and will it effect the running of the car?I do plan to get a td05 soon and then get remapped.Cheers

It could be maf and or pipe split somewhere.What filter you using at the moment?

What you got on it at the moment?Check you codes !

Weston do you have original airbox or cone filter or ?I had a k&n cone when I bought my car and it was the oily type,and I changed 3 mafs in the space of a few months,till I reverted back to standard box and new maf and all has been fine.Some people don't have any probs but I bloodywell did!! Any codes coming up?Maf code 23 I think 2 long and 3 short flashes,but it doesn't always show up.

Hi and welcome to the club :)

Good on ya david,got mine from a rescue centre as well.Looks like hes found his seat in the house ;)

Cheers for that.Cant wash my car at the mo,as stickers were put on yesterday,and told me not to wash the car for a few days!So i sitting here bored out of my mind.Nothing to tinker with neither :(

When you say clean before hand-just a good wash then,no polish.Silky smooth :D

Cheers stant,will have to look into it.Same here paranoid about F***ing it up

Ive always wanted to clay my car,but I don't have a clue about.Is it roughly clay/water and rubbing the paintwork etc.Is it easy?Dont mind hard work but don't want to make the paintwork worse(knowing my luck).

Finally got my stickers put on the doors today....At last :)

:D

Google the reviews mate,quite a lot of negative comments about them,but a few good.Personally id keep the money and spend it on your car.But its up to you.Just be careful with your right FOOT ;)

Im 43 going on 20 as the missus says! And she also says I still live in the eighties as all the eighties tv I still watch :D

Dont know if this helps as it was listed for impreza's? MY93-96 ... 3 port solenoid 2.0mm restrictor fitted into the vent pipe between solenoid lower port and intake MY97 (Euro) ... 2 port solenoid 1.2mm restrictor fitted between the turbo and the tee piece MY97 (JDM) ... 2 port solenoid 0.9mm restrictor fitted between the turbo and the tee piece MY98 (Euro) ... 2 port solenoid 1.2mm restrictor fitted between the turbo and the tee piece MY98 WRX (JDM) ... 2 port solenoid 0.9mm restrictor fitted between the turbo and the tee piece MY98 Sti 4 ... 3 port solenoid 1.5mm restrictor fitted between the turbo and the solenoid adjacent to the solenoid top port MY99 (Euro) ... 2 port solenoid 1.2mm restrictor fitted between the turbo and the tee piece MY99 (JDM) ... 2 port solenoid 0.9mm restrictor fitted between the turbo and the tee piece MY00 (Euro) ... 2 port solenoid 1.2mm restrictor fitted between the turbo and the tee piece MY00 (JDM) ... 2 port solenoid 0.9mm restrictor fitted between the turbo and the tee piece MY01-05 (Euro) ... 2 port solenoid 1.2mm restrictor fitted between the turbo and the tee piece MY01-05 STi ... 2 port solenoid 0.9mm restrictor fitted between the turbo and the tee piece MY06/MY07 both WRX and Sti 2 port solenoid 0.9mm restrictor between turbo and tee piece

I feel for you nevell ;) I get that feeling everytime I browse ebay and other sites..At the moment im looking at backboxs maybe ninja2 or tornado......

Hi and welcome to the site mate