Spenceeyboy

Cheers mate its appreciated like because there's no other rear wheel drive Scoobys in my area haha

I'm.considering drifting it like if I was gonna do a conversion then now would be the time to do it

1:has anyone fitted a hydraulic handbrake to a bugeye before? And if so is there a how to guide? 2: has anyone done a rear wheel drive conversion on a bugeye? And again is there a how to guide.or a build thread or something as a rough guide?

So could I blank the intercooler port off and put the two pipes.on that run to the dump.valve

I've filled the expansion bottle.to the full mark do I need.to.fill the radiator up to the top as well ? And what's the crack with the metal tank that looks like it has.coolant in it as well

So I've just just put a happened radiator on my bugeye and I'm wondering what's the correct bleeding procedure of the coolant back into the cooling system if someone could point me.in the right direction would be really appreciated

So I bought a baileys dump valve for my bugeye the only bother is it doesn't have the diamond shaped adaptor plate on what I'm.wondering is it.ok to put the dump.valve on and leave the port.coming from the intercooler open or do I need a the dumpvalve with diamond shapes adaptor on it

It's a turbo

I've got. 51 plate bugeye currently.sat on 186000 ish on the clock with a good service history what I'm wondering is would this engine take 280-300 bhp obviously with tuning if not could I get the go engine and transfer the turbo the inlet and all the other parts on to it.to make it a turbo engine???????

After a ser of bugeye standard headlighta I've got morrettes to swap for them or can give cash

Does anyone know how to.install a oil pressure and water temp gauge thanks.in advance

I've got a 2001 bugeye and Im.wondering if any one knows the best place to get engine mods from such as dump valves alloy radiator silicone hoses etc etc

I know.I may have sort of mentioned it.on another post but could anyone give me any advise or point in the right direction of.getting my bugeye to 300bhp if anyone could give a list of parts I need or.put me in contact that could.would really appreciate it

Standard bugeye airbox wanted in Dumfries and Galloway area

Possibly the piston rings?

Cheers buddy

Does anyone know the wheel sizes and stud patterns for a 51 plate bugeye

I've talked to the previous owner.he's reckons it's a blue tinge and smells a bit smoky on tic over but not when it's driving?

So I've got a couple of questions as I'm new to owning an impreza.I've bought a 51 plate bugeye with a 160,000 ish on the clock she's a bit.rough but shes goes great. However I have an issue that I hope isn't to bad when it's warm and sat on tic over it blows a little bit of smoke however it's not there when your driving about in it and the other question I ask is what parts do I need to get my car up to round about 300 bhp