classic steve Posted February 16, 2015 Posted February 16, 2015 Hi all. After scratching my beard ive decided i cant sell my scoob. Test drove some focus st225 and just doesnt cut the mustard. Anyway, had a little blast in my scooby yesterday and noticed a very slight clutch slippage in 3rd. I know im probably being over protective but want to get the clutch done asap. Scoobyworld are fairly local to me so will prob use them. Whats the general opinion of a lightened flywheel done at the time of clutch replacement? Dont use the car for anything other than a road car. Steve
savage bulldogs Posted February 16, 2015 Posted February 16, 2015 Lightened flywheels are supposed to increase throttle response but when fitted to GM na v6's they've been known to loose torque , possibly due to having less mass when moving . Whether the same applies for turbo'd cars I couldn't tell you . I've never had a lightened flywheel fitted on either of my scoobs I just had the standard flywheel skimmed,to insure it's 100% flat and reduce the chance of clutch judder . 1
classic steve Posted February 16, 2015 Author Posted February 16, 2015 Thought id ask before i spent extra cash. Done plenty of googling and it seems a lot of folk say not to bother unless the cars going on the track. A skimmed flywheel is £90 from scoobyworld. Pink box exedy clutch and flywheel skim supply and fit is £590. Seems a pretty decent price to me. Anyone know anywhere else in leicester that are worth trying?
Steveuk260.Esq Posted February 16, 2015 Posted February 16, 2015 Thats quiet a decent price m8. Yeah I would just skim flywheel. For normal every day road use use standard clutch wouldnt bother with anything else. Exedy is a good choice had one put into my forester. 1
classic steve Posted February 16, 2015 Author Posted February 16, 2015 Thought it seemed an ok price to supply and fit. My dads 52 plate mondeo cost him near on a 1k to have a clutch change. More that the car was worth. lol.
savage bulldogs Posted February 16, 2015 Posted February 16, 2015 Are you sure it's a pink box exedy classic steve ? As if so they cost about £280 so it's a good price all in I think subaru fit standard exedy from the factory and although slightly cheaper they'll still handle just over 300hp . Either way it's a dam site cheaper than the £1200 + someone got quoted from a main stealer last year on here
classic steve Posted February 16, 2015 Author Posted February 16, 2015 Its actually £569.99 to supply and fit the clutch then £90 for the skimmed flywheel. So its £659.99 in total. I need to learn to read. lol.
classic steve Posted February 16, 2015 Author Posted February 16, 2015 Been scoobyworld a few times for bits and pieces but never any major work. Their pretty helpful. Needed a single turbo bolt on my first scoob when i put a cat on for an mot and they were more than happy to let me have just one bolt. Saved messing about on fleabay. 1
classic steve Posted March 5, 2015 Author Posted March 5, 2015 Hi all. Booked my car to sort out the clutch. Felt like a right plum. So ive been informed i dont drive enthuiasticly enough. lol. Quick blast with a few 3k rev pull offs and the slipping is no more. Clears any crap on the flywheel apparently. Defo need to drive the scooby more. lol. 1
Steveuk260.Esq Posted March 5, 2015 Posted March 5, 2015 Im confused [emoji780] [emoji845] [emoji845]
Gambit Posted March 6, 2015 Posted March 6, 2015 Scoobyworld did my Engine rebuild and clutch with lighten flywheel but it was a new age. Since had another clutch put in by Sheffield Subaru Services but my lighten flywheel had cracked and was unsure if they could skim it :( but they replaced it for me for free which was good of them :)
D.Pavely Posted March 7, 2015 Posted March 7, 2015 That's bit of luck then must have been a bit of surface corrosion on the wheel, simples
richr Posted March 15, 2015 Posted March 15, 2015 Hi all. Booked my car to sort out the clutch. Felt like a right plum. So ive been informed i dont drive enthuiasticly enough. lol. Quick blast with a few 3k rev pull offs and the slipping is no more. Clears any crap on the flywheel apparently. Defo need to drive the scooby more. lol. Many years ago my mate had a xr3i, yes when they were new, thats how old i am I had to take that for a blast as he had managed to glaze the friction plates Nice to know you have some spare pennies to spend elsewhere
crimson Posted March 21, 2015 Posted March 21, 2015 My clutch is very hard see my post on it I live in London but the price from scooby world cant be beaten !Local to me is ExtreemScooby a 30 minute drive but they are asking for £860 including flywheel Scooby word is £660 with new skimmed flywheel £200 supply and fit cambelt and a full service at £400means i can can do a complete clutch, service, cambelt at £1260 thats worth me travelling up there !
classic steve Posted March 21, 2015 Author Posted March 21, 2015 Scoobyworld do have good prices for work done. Their normally booked up for about 2 weeks so plan ahead.
crimson Posted March 21, 2015 Posted March 21, 2015 yeah i found out yesterday ! offered me april ! so they squeezed me in but can only do clutch
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now