Bennyboy Posted April 13, 2015 Share Posted April 13, 2015 Still got the engine management light on after fitting a new oxygen sensor and also put the cat back on still coming up with the same fault Heater element malfunction in the oxygen sensor had an electrician check everything and everything is ok wiring loom wise even the old sensor is good Any ideas would be much appreciated Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hayleighx Posted April 13, 2015 Share Posted April 13, 2015 I have the same problem well similar getting it checked today will offer advice if I have any! Wish me luck! Quote Link to comment Share on other sites More sharing options...
Bennyboy Posted April 13, 2015 Author Share Posted April 13, 2015 Which model is yours Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hayleighx Posted April 13, 2015 Share Posted April 13, 2015 Bugeye Quote Link to comment Share on other sites More sharing options...
Gambit Posted April 13, 2015 Share Posted April 13, 2015 there is 2 on the bugeye Quote Link to comment Share on other sites More sharing options...
Bennyboy Posted April 13, 2015 Author Share Posted April 13, 2015 I've just looked and yes there is two Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bennyboy Posted April 13, 2015 Author Share Posted April 13, 2015 Are they the same sensor Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gambit Posted April 13, 2015 Share Posted April 13, 2015 I think it throws the same code it's the bank from my understand if it's 1 or 2 depends which one it is but don't hold me to that :) Quote Link to comment Share on other sites More sharing options...
hayleighx Posted April 13, 2015 Share Posted April 13, 2015 What code have you got mine is the one before the cat Quote Link to comment Share on other sites More sharing options...
hayleighx Posted April 13, 2015 Share Posted April 13, 2015 Need to get a new one and hope prob is fixed!! Quote Link to comment Share on other sites More sharing options...
Bennyboy Posted April 13, 2015 Author Share Posted April 13, 2015 It's definitely the one before the turbo on mine had it tested and its blown no Heater circuit plus it's the original one by the looks of it so that's another 100 pound to spend [emoji30] Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hayleighx Posted April 14, 2015 Share Posted April 14, 2015 Quote Link to comment Share on other sites More sharing options...
Gambit Posted April 14, 2015 Share Posted April 14, 2015 Gutted but keast you know I guess. Quote Link to comment Share on other sites More sharing options...
Ash007ks Posted April 14, 2015 Share Posted April 14, 2015 have you had the code reset after the new part was fitted, if not that could be your issue, unplug the Battery fro 15 mins and that should reset the ecu as well :)_ i do have a decat downpipe that will fit yours if you wanted :) Quote Link to comment Share on other sites More sharing options...
Bennyboy Posted April 15, 2015 Author Share Posted April 15, 2015 All sorted now sensor before the turbo cured it thank god 300 pound in a week I've spent Now I need a decent exhaust system as I don't like the sound of the miltek system that's on it Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.