2001 wrx re circ valve refit

[Barts.]

Hi,

So I've just tried to remove my dump valve and re fit the re circ valve but I can't seem to find the hose the the valve fits to. Could this have been removed?

And help or maybe a pic would help.

Thanks in advance

[martyc]

Normally it will be below and slightly to the left of the dump valve position shown by the silver blanking plug in this pic...

Sent from my SM-N9005 using Tapatalk

[Gaulson]

The hose comes from the inlet hose (to the turbo) and comes up just under the dump valve. It will either be removed and blanked at the inlet or kept in place and blanked off as can be seen in the picture above.

[Barts.]

This is what I can see under my inter cooler

[Barts.]

Hi I've found the pipe it's blocked off at the large intake pipe.

One more thing,I've just found this pipe connected to nothing.

[Barts.]

No ideas guys. Small air line going nowhere. There is a connection at the top of the unit that goes into the loom.

It's connected by the wires but the hose goes nowhere.

[D.Pavely]

Looks like some sort of solenoid, does it pull a vacuum when running/loading the engine.

[D.Pavely]

Just had a thought could be purge solenoid valve for the fuel system is it on the right side of the engine bay next to the filter. If it is may have been blanked of or left disconnected by someone not knowing what there doing

[Barts.]

Yes pal its on the right side next to the fuel filter.

Do you know where it should go?

[D.Pavely]

With out looking no I've got a classic so it's a bit different but if look around the manifold you may find a pipe that's been blocked off etc