Hi guys,

The air pipe from induction kit to turbo needs replacing from original to a stronger samco one, the question is do the manifold head need to be removed first or can the air pipe be warmed up and bend through the tight gap? Which would save a lot of work I guess. It's on my rb320. Advice needed! Cheers (it's the big red pipe goes under manifold head that needs replacing)

 

Sent from my HTC One M9 using Tapatalk

 

 

It new pipe will be shaped to fit under the inlet etc but the are a royal pain in the **** , could be a lot easier to remove the inlet but that's about a days work

Looks a bit of a b'tard tbh lol..just very tight and not much space. Think it's a three arches Cardiff job,thanks for advice bud

 

Sent from my HTC One M9 using Tapatalk

 

 

If it's the oem one that's coming out get a hacksaw blade and cut it into bits, much easier, and the replacement silicone one should go in with some manipulation without having to take the inlet off

 

Sent from my SM-G930F using Tapatalk