Ellsa1 Posted September 20, 2017 Share Posted September 20, 2017 Hey guys So I changed my gearbox and the spedo isn't working it was before but not now the new gearbox is in and the car is in limp mode I've tried cracking it up and it's tight in the box but still can't get anything the gearbox it the only thing I've touched so it shouldn't be behind the clocks is there anything else I can try ? I've ordered a new lower part of the cable but I'm a bit joubious because it was working , any help please guys [emoji106] Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted September 21, 2017 Share Posted September 21, 2017 Have you done a ecu self code check ? If not have a squint in the tech section on here for the how 2 .Its probably because the ecu needs a speed reading to help calculate load . Have you checked the upper and lower cable join and where the cable goes into the box ,are fitted correctly?As they can be a pita to line up .Sent from my SM-G930F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.