Carlmurph Posted June 26, 2019 Share Posted June 26, 2019 Hi, can anyone tell me where the EVAP sensor is located on a Impreza 1999 uk turbo 2000 problems starting Error code P0451 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 26, 2019 Share Posted June 26, 2019 If you mean the purge valve , its bolted to the underside of the inlet manifold, normally has a couple of vacuum lines attached and a plug from the loom . They're a bit of a pain to get to ,with the inlet still attached to the engine but they can be removed without removing the whole inlet . Just check the vacuum lines from the purge valve to the charcoal canister (black plastic cylinder at the front of the bay) ,fuel line and intake pipe are all still connected and dont have any splits in them first . As the evap system doesn't often fail tbh . Quote Link to comment Share on other sites More sharing options...
Carlmurph Posted June 27, 2019 Author Share Posted June 27, 2019 Ok thank you I will have a look when I get back from work. It’s driving me nuts when the CEL is flashing it won’t start but then sometimes it does not come on and it starts. Had a few errors at first but now this P0451 is what I’m left with Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.