Nimpy Posted June 22, 2022 Share Posted June 22, 2022 Hi guys, see pic is this right? There doesn't seem to be anyway to fix the brake pipe to the strut where it passes through, concerned that it may rub through the pipe, I didn't remove them hence the questions. Cheers! Quote Link to comment Share on other sites More sharing options...
Nimpy Posted June 22, 2022 Author Share Posted June 22, 2022 I think there are some clips missing, am I right?? Quote Link to comment Share on other sites More sharing options...
Mr B Posted June 22, 2022 Share Posted June 22, 2022 If the fitting on the hose at the bracket correct for SF struts the flat sides (needs rotating 90degrees) will fit between the raised parts of the strut bracket and a clip goes on the back and locates in the sides of the groove on the fitting . Clips can be had via Subaru dealer parts counter generally next day and are less than £3 each . If that the wrong sized fitting some faffing about will be required or possibly a custom P clip bracket made . It needs sorting as not really road safe left like that and be an MOT issue and a bigger issue in a accident vehicle inspection report ... Also a good loophole for insurance void your cover ... Seen a lot of half arsed mess on aftermarket poor fitment and poor installation brake lines over the years. amazing how someone thinks that half arsed job an upgrade !! 1 Quote Link to comment Share on other sites More sharing options...
Nimpy Posted June 22, 2022 Author Share Posted June 22, 2022 Cheers Mr B, will get the clips ordered, luckily it's not a daily so won't be in the road until sorted. Quote Link to comment Share on other sites More sharing options...
Nimpy Posted June 23, 2022 Author Share Posted June 23, 2022 New clips sourced, will get them fitted today 🙂 Quote Link to comment Share on other sites More sharing options...
Mr B Posted June 23, 2022 Share Posted June 23, 2022 hopefully all fits well but many times on braided lines you find the fittings wrong for bracket & hose rubs against strut or arch tub edge or sits far to close to it . I suspect those lines might of been SG model versions and if so bracket fitting differs slightly . 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.