velocity technology Posted January 17, 2014 Posted January 17, 2014 have you checked the boost solenoid?
chrisbarter Posted January 17, 2014 Author Posted January 17, 2014 Is that the small solenoid on the top of the engine yeah? Pipes down to the turbo and wastegate actuator . . I unplugged that and it generated a fault code on the ecu so I plugged it in , cleared tje fault and it seemed to be fine. After that I used my mates Autel diagnostic kit and it did find a couple of codes mine didn't one being B0201 I think which was a high speed CAN communication error?. Seems to run ok but has a really nasty splutter and power is almost completely on and off but only noticeable at 5000 rpm in 6th gear so can't really keep going out and testing it lol :/ . 1
chrisbarter Posted January 17, 2014 Author Posted January 17, 2014 When I tested it at lower speeds this is what it did. It appears to climb to full boost pretty quick then trail off in the last 2 or 3000 rpm before redline. Not knowing the performance of the turbo its self I dont know how it should look!.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now