Jump to content

legacy drinking oil


sweetlegacy
 Share

Recommended Posts

my 2.5 tiptronic legacy is burning oil.

i serviced the car last month, using millers nano 5w30, but after less than 1.5ki have put in 1litre of oil.

no leaks, no smoke, no oil in exhaust, no coolant loss, car runs quiet etc.is this normal?

I drive in sports around town, 80% of time and above 69mph on motorway the other 20%

the car has done 186k, my regret is that I should have used thicker oil, 10w40, perhaps.

Link to comment
Share on other sites

Cheers, I will leave the slick 50 for now and possibly carry on topping up the 5w30 for another 2 or 3k, but then change over to 10w40.

I am planning on a oil and filter change every 5 or 6k.

Link to comment
Share on other sites

the thickness of the oil shouldn't be related to loss - it will however help (as will slick 50) with a noisier engine attributed to wear through higher miles, you mention burning oil but there is no smoke or deposits in the exhaust?

 

It must be going somewhere - I would do more checks for smoke and keep an eye on the coolant - has the engine ever been rebuilt?

Link to comment
Share on other sites

my 2.5 tiptronic legacy is burning oil.

i serviced the car last month, using millers nano 5w30, but after less than 1.5ki have put in 1litre of oil.

no leaks, no smoke, no oil in exhaust, no coolant loss, car runs quiet etc.is this normal?

I drive in sports around town, 80% of time and above 69mph on motorway the other 20%

the car has done 186k, my regret is that I should have used thicker oil, 10w40, perhaps.

No all oils are the same. Try another brank like Motul, etc. I would move to a 10w30. or 10w40.

 

Check your intake and see if you have any oil in there. It has to be burning off,since you don't have puddles on the ground (you didn't mentioned)

Link to comment
Share on other sites

sorry I am not very good with cars, bear with me...

no from all service history and receipts cannot see engine rebuild.

I don't have any oil on the ground or any leaks I can see in the engine.

what I meant about not burning off was I could not see grey/white smoke from the exhaust.should I be placing my hand in the exhaust (when cold) and seeing if there is oil there? sorry where is the intake?

the coolant level seems to be at the maximum line in the white expansion tank hot or cold- I usually check unscrew the metal cap and the coolant is always at the top, am I doing this wrong? if there is coolant loss what does that mean?

are there other checks that I need to carry out?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support