BlackBosh Posted October 21, 2014 Share Posted October 21, 2014 Thought you'd got rid of me! Well I got rid of the Astra instead so now only have the Subaru and a gorgeous new triumph to drain the wallet. Its now easier to focus on my baby. finally decided to do my calipers from *cough february cough* Luckily I bought a spare set cheap and think they maybe on the way as well so want another set to swap straight on. My question to yous guys is how the fudge do I remove the seized pistons notice they are on the "same" side Any idea on the best place to get seals as well as maybe a couple of pistons as the majority are reusable. TIA & sos if this is wrong spot gambit, feel like a newbie again Quote Link to comment Share on other sites More sharing options...
Gambit Posted October 21, 2014 Share Posted October 21, 2014 Hi mate welcome back glad to hear you kept the Scoob :) as for the calipers mate I had a problem with mine and got another set like you I was going to refurbish them too but decided I didn't have the time to do it not even at a slow pace :( But I'm sure you have to get them out with a grease gun or something that gives loads of pressure I came across this pretty good vid, I know it's not subaru calipers but basic idea :D Quote Link to comment Share on other sites More sharing options...
Tlag Posted October 22, 2014 Share Posted October 22, 2014 If you have use of an air compressor, put the pistons that are lose, back in. Put a block of wood between the pistons and fire air through the caliper. Make sure the wood is big enough to stop pistons flying out but small enough to allow the pistons to budge. If you have blocks of wood, it's 10 seconds work at a garage. 2 Quote Link to comment Share on other sites More sharing options...
Scooby Pete Posted October 22, 2014 Share Posted October 22, 2014 Or just buy some AP or Brembos, go on you know you want to:) 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted October 22, 2014 Share Posted October 22, 2014 I bought this kit that uses stainless steel pistons (so they don't seize again) http://www.godspeedbrakes.co.uk/~godspeed/product.php?id_product=150 Think Ian still sells the mild steel pistons and seals separately if budget won't allow 1 Quote Link to comment Share on other sites More sharing options...
BlackBosh Posted October 23, 2014 Author Share Posted October 23, 2014 This was how i managed it took me 20 minutes but thanks for the suggestions, lesson learnt from this, bolt my vice down haha Quote Link to comment Share on other sites More sharing options...
BlackBosh Posted October 23, 2014 Author Share Posted October 23, 2014 Looking at the parts it seems the calipers are the culprits not the pistons. Hmm Quote Link to comment Share on other sites More sharing options...
BlackBosh Posted October 28, 2014 Author Share Posted October 28, 2014 Managed to salvage 4 pistons, the other 4 were either damaged by me removing them or were already pitted and knackered before I started. Quote Link to comment Share on other sites More sharing options...
Gambit Posted October 28, 2014 Share Posted October 28, 2014 If you have to buy them don't they come in a set of 8's ? I'd be tempted to just have the all renewed seeing as you have them out :) Quote Link to comment Share on other sites More sharing options...
BlackBosh Posted October 28, 2014 Author Share Posted October 28, 2014 They come in sets per side 4 are literally intact and taken from opposite sides as clearly there is a weak point for corrosion, The 2 that were stuck fast were in the mirror position of each other, If you follow. It's only £20 for a seal set as well so saving a fair bit of dosh as other things need buying this month 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.