Rick 2014 Posted May 22, 2015 Share Posted May 22, 2015 Its just two pipes mate it isn't hard at all Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 23, 2015 Author Share Posted May 23, 2015 Silly questions rick .. can i push the elbows into the water pipes easily enough ..whilst the turbos in situe from the top? And pther than the 3 bolts on the turbo vracket ehat else needs to come off? 1 Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted May 24, 2015 Share Posted May 24, 2015 Silly questions rick .. can i push the elbows into the water pipes easily enough ..whilst the turbos in situe from the top? And pther than the 3 bolts on the turbo vracket ehat else needs to come off?Yes you can mate I will get some pics for you in a bit.Im working on the car today 1 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 24, 2015 Author Share Posted May 24, 2015 Cheers rick Quote Link to comment Share on other sites More sharing options...
stants Posted May 24, 2015 Share Posted May 24, 2015 Notice you have a v1/2 with the slanty cooler, I have a v3/4 cooler sat in my man cave fairly easy uprate/mod if your interested [emoji51] 1 Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted May 24, 2015 Share Posted May 24, 2015 Hi ive just looked at mine.The top water feed pipe is easy peasy.For the lower one you will need nose pliers with a l shaped bend to pull the clip of the water hose.There is a lower bracket which you will need a small ratchet for then undo the banjo bolt and slide the banjo pipe out.I tried taking a picture but its hidden behind my hoses Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 24, 2015 Author Share Posted May 24, 2015 Ive got that tools rick it just seems very fiddly.. i was told i could looseb the turbo and ease it over. . So i van get to the bottom pipe.. however i dont no what i have to take off to get there :s what sort of clip is it just a pull one? Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted May 24, 2015 Share Posted May 24, 2015 No need to remove turbo mate trust me,why make more work for yourself if you don't need to Quote Link to comment Share on other sites More sharing options...
Rick 2014 Posted May 24, 2015 Share Posted May 24, 2015 Looks roughly like this down below http://www.ebay.co.uk/itm/1-x-Mikalor-Metal-SPRING-BAND-CLIP-TYPE-Silicone-Hose-Clamp-Fuel-Pipe-Oil-Lines-/251162915816?pt=LH_DefaultDomain_3&var=&hash=item3a7a79f3e8 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 26, 2015 Author Share Posted May 26, 2015 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 26, 2015 Author Share Posted May 26, 2015 My bottom feed is directly below the top feed and as you can see its reaaly tight. .. u sure i can get to it buddy? Look awfully tight to be doing.. i can see 3 bolts that have been teplaced on the turbo bracket but i dont know what else i need to undo to get proper acces.. want to make sure its tight first time Quote Link to comment Share on other sites More sharing options...
stants Posted May 26, 2015 Share Posted May 26, 2015 Remove the intercooler, it's only that jubilee clip and the two 12 or 14mm bolts on the sides of the i/c will give you loads of access 1 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 26, 2015 Author Share Posted May 26, 2015 Ok mate ill see how i get on still waiting for parts from japan Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 I am stumped guys. .. cnt figure out how i get the turbo off..ive undone thr 3 brackets that sit to the left of the turbo all pipes are off including exhaust clamps but i cannot manovoure the turbo so it can come it the turbine blades foul the turbo so i cannot pull it off Quote Link to comment Share on other sites More sharing options...
stants Posted May 27, 2015 Share Posted May 27, 2015 You need to undo the 4 or 5 bolts on the downpipe which is a challenge in it's self. If you've already done the up pipe bolts it should just come away Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 Ill have a go stants wish i never started this lol never would of imagined its such a tight fidley job Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 Ill need to get underneath to do these wont i? Quote Link to comment Share on other sites More sharing options...
stants Posted May 27, 2015 Share Posted May 27, 2015 The ones round the top and the studs are fairly easy, it's the one underneath between the turbo and pipe that's a f****r to get at a flexible 14mm socket is the easiest option, do you have a new downpipe gasket aswell ? I notice the lambda sensor hole is bunged up behind the turbo, have you relocated it ? Quote Link to comment Share on other sites More sharing options...
stants Posted May 27, 2015 Share Posted May 27, 2015 If you were closer i'd have offered a hand mate as it's easier with two people, Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 2 lambda sensors dont no weather there correct mate Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 Quote Link to comment Share on other sites More sharing options...
Samuel_Kelham Posted May 27, 2015 Author Share Posted May 27, 2015 And yes 2x gaskets...one other question stants when taking the turbo out how do i go about taking the pipe underneath off i can 'just' see the clip can i pull it up slighlty to unclip ot is this another fiddly underneath job? Quote Link to comment Share on other sites More sharing options...
stants Posted May 27, 2015 Share Posted May 27, 2015 Good man it would be a pain in the !Removed! to re attach it all then have 5o change the gasket in a month due to it blowing, Looks like ones been moved or someone's put a thread in for a wideband afr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.