Ash3000k Posted May 27, 2015 Share Posted May 27, 2015 Hi all, Got my first WRX (2001) yesterday, thought I would broaden my knowledge of this epic car, I'm surprised how good the car is mechanically for its age, the only issue is that I have a judder when gearing down and setting off from a stand still! I have had a quick google and have found that it may be that the clutch is on the way out... but other places/people say its just the way these are? Also, I tried to contact my local dealership to find out about if there has been any recalls etc, only to find out that my VIN is not recognised by the systems?!?!?! Any help would be greatly appreciated, Cheers Ash Quote Link to comment Share on other sites More sharing options...
WideSam Posted May 27, 2015 Share Posted May 27, 2015 Welcome! My legacy has bad clutch judder when it's cold. Also I've heard uprated clutches can cause judder... Quote Link to comment Share on other sites More sharing options...
Ash3000k Posted May 27, 2015 Author Share Posted May 27, 2015 Thanks! Its not just when cold, its all the time unfortunately, When I first pull off from a stop and when I gear down it judders, I dont think it has uprated clutch... Quote Link to comment Share on other sites More sharing options...
stants Posted May 28, 2015 Share Posted May 28, 2015 Could be a paddle clutch inside, very worn engine &gearbox mounts can cause excessive judder too Quote Link to comment Share on other sites More sharing options...
Ash3000k Posted May 28, 2015 Author Share Posted May 28, 2015 Hi thanks I will check out the mounts, would this be identified on MOT tho? Quote Link to comment Share on other sites More sharing options...
stants Posted May 28, 2015 Share Posted May 28, 2015 If they were falling apart yes if the were just worn maybe not, I put a new gearbox mount in at Christmas and it made everything nice and tight don't get half as much judder as I used to My old one 1 Quote Link to comment Share on other sites More sharing options...
Ash3000k Posted May 28, 2015 Author Share Posted May 28, 2015 Thanks I may try that before I got to the expense of clutch and flywheel, Quote Link to comment Share on other sites More sharing options...
stants Posted May 28, 2015 Share Posted May 28, 2015 That lot was around a ton and if you want to do the the engine mounts they are the Same price for sti stuff Quote Link to comment Share on other sites More sharing options...
Ash3000k Posted May 28, 2015 Author Share Posted May 28, 2015 That lot was around a ton and if you want to do the the engine mounts they are the Same price for sti stuff Sorry I'm really new to scoobies, So I could replace my WRX engine and gearbox bushing with the STI bushing? (is it better than the WRX ones?) Quote Link to comment Share on other sites More sharing options...
stants Posted May 28, 2015 Share Posted May 28, 2015 Yep you can see there's no bits cut out in the middle of this one, Loads of goodies here http://www.scoobyparts.com/sti-parts 1 Quote Link to comment Share on other sites More sharing options...
Ash3000k Posted May 28, 2015 Author Share Posted May 28, 2015 Great stuff thanks, 1 Quote Link to comment Share on other sites More sharing options...
Ash3000k Posted June 3, 2015 Author Share Posted June 3, 2015 Ok VIN issue sorted but still having the judder when pulling off in warm and cold, getting me down about the car now as I really struggle in stop start traffic to and from work each day (esp the parts where its uphill) :( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.