benji.karabash Posted January 5, 2016 Share Posted January 5, 2016 Hi my name is Ben and I'm an owner of a Subaru WRX MY98 and it has a serious problem that is getting worse. The problem started a few months back, I would take it for a drive and I would drive it how a Subaru is meant To be driven, but after a cruise in the highway or a 10min drive once the car has been stopped at a traffic light and then I take of and the turbo starts to cut out, once the car hits boost it almost like stops it and makes a jerking affect to it and it's starting to do it in 1st gear and in take off but the strange thing is that if I pull over turn the car off and back on straight away the works good as new, so it's seems like a electric problem and it's getting worst so please help anyone who knows please let me know Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
stants Posted January 5, 2016 Share Posted January 5, 2016 Hello &welcome, 1st what mods do you have ? 2nd have you any check engine lights come up & have you done an ecu self test using the green connectors under the steering wheel ? Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 6, 2016 Author Share Posted January 6, 2016 Well the car is highly modified what I know of the top of my head the car has bigger injectors, it's still running a td04 turbo with a turbo smart bov and little things here and there, and no there is no engine light and no I haven't done a self test for the ecu Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 6, 2016 Author Share Posted January 6, 2016 It's just an annoying problem and it feels like it is doing damage to the car Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Do_you_even_boost?? Posted January 6, 2016 Share Posted January 6, 2016 I was hitting fuel cut on boost but was there all the time regardless of switching on and off mine had stored fault codes without the check engine light on turned out to be in correctly wired inlet (phase 1) clip the green ones and go for a drive 1 Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 8, 2016 Author Share Posted January 8, 2016 So you are advising to cut which green wire? Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 8, 2016 Author Share Posted January 8, 2016 Like the fuel cut on the WRX is completely open, I have cleaned the boost regulator and fuel cut, but it's seems electrical because the engine in running perfect, this problem is like it has a timer after like 10min it starts Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 8, 2016 Author Share Posted January 8, 2016 The car has only done 42 000km but it's just this problem, it's very annoying Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tidgy Posted January 8, 2016 Share Posted January 8, 2016 has it been mapped for the bigger injectors? Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 9, 2016 Author Share Posted January 9, 2016 Yes it has been Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 9, 2016 Share Posted January 9, 2016 We have a guide on here in the how to section on how to read codes from the ecu. With a bit of what each code means. So please don't cut any wires haha. But the two wires are under the steering wheel well in the drivers foot well above the pedals in the dash you put together to put the car in the right mode to read codes. I'm on my phone at the minute. When I get on the pc later I'll link you too the post if you don't find it before. :) 1 Quote Link to comment Share on other sites More sharing options...
Steveuk260.Esq Posted January 10, 2016 Share Posted January 10, 2016 So you are advising to cut which green wire? Sent from my iPhone using Tapatalk What gambit posted. Just to add you, do not cut any wires. It's simply 2 plugs you plug to each other.Sent from my SM-G900F using Tapatalk Quote Link to comment Share on other sites More sharing options...
benji.karabash Posted January 11, 2016 Author Share Posted January 11, 2016 Ok thanks for the link to this but what will this do if I do what the link says? Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 11, 2016 Share Posted January 11, 2016 I've not posted a link yet mate. But it's in the how to section. And it will give you the fault codes from the ecu which might help find the problem or problem's might get a few codes. Quote Link to comment Share on other sites More sharing options...
Gambit Posted January 11, 2016 Share Posted January 11, 2016 http://uk.subaruownersclub.com/forums/topic/2366-manually-reading-ecu-codes/page-1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.