Mark D Posted July 6, 2016 Share Posted July 6, 2016 Will be at snetterton race track Thursday, so if you look hard enough, there will be one in the car park :) doing temp work while the super bikes are racing! 1 Quote Link to comment Share on other sites More sharing options...
Mark D Posted July 7, 2016 Author Share Posted July 7, 2016 Quote Link to comment Share on other sites More sharing options...
charleseaton1 Posted July 8, 2016 Share Posted July 8, 2016 What exhaust is that on it? Does it pop and bang? Mine doesnt so looking for a new one Quote Link to comment Share on other sites More sharing options...
quit Posted July 8, 2016 Share Posted July 8, 2016 to get a sport to pop and bang you need different headers 1 Quote Link to comment Share on other sites More sharing options...
Mark D Posted July 8, 2016 Author Share Posted July 8, 2016 Hi it's my friends car, when she got it the previous owner changed exhaust from cat back, it does a little rumble when lifting off the accelerator, but there is a leak in the exhaust at the moment. It was quite loud when she got it, guy at a Subaru breakers had a pro sport back box that made it quieter which is what is on at the moment, but had to cut a bit off it to make it fit as got different mid pipe. compared to my legacy (don't know how similar the exhausts are) it looks like the mid pipe is missing the resonator box Quote Link to comment Share on other sites More sharing options...
Mark D Posted July 8, 2016 Author Share Posted July 8, 2016 By the way that's a nice looking special :) don't know if it's the camera but it makes my friends one look faded. Does yours have this really annoying rev hang when cold, where when accelerating and letting off the throttle (doesn't matter how quickly you let off) it will stay at the same revs, then after 2 secs will slowly... Slowly drop down? I've read up about similar complaints but think they were when engine warm? only way to make it drop slightly quicker is to take out of gear, de-clutch in neutral, to slow engine speed slightly, then clutch and stick into gear :SÂ Quote Link to comment Share on other sites More sharing options...
charleseaton1 Posted July 9, 2016 Share Posted July 9, 2016 No i dont get any problems with it, all does as it should. Its been very well looked after in all fairness to previous owners. Only issue i had with it was the siezed slide and guide pins on the brakes but other than that all good. @mattwhat headers would make a difference can you point me in the right direction thanks Quote Link to comment Share on other sites More sharing options...
quit Posted July 9, 2016 Share Posted July 9, 2016 The turbos use unequal length headers to give it that Scoob burble , the sport just uses normal I think 2 Quote Link to comment Share on other sites More sharing options...
Mark D Posted July 9, 2016 Author Share Posted July 9, 2016 Just a thought, when you say pop and bang, are you talking about the huge bang when changing gear like the rally cars? If so that's anti lag used to keep the turbo spinning when the boost would drop. if not, then sorry was just a thought when driving back home :) Quote Link to comment Share on other sites More sharing options...
charleseaton1 Posted July 10, 2016 Share Posted July 10, 2016 No not antilag just the general scooby sound. Mine dont get me wrong sounds good, but it dont barble like other scoobies do even when idling. Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted July 10, 2016 Share Posted July 10, 2016 As Matt said it's the unequal length Headers that cause the scooby burble . There are a few companies that make unequal headers for na scoobs but they're fairly expensive, so you'd probably be better off looking for a second hand set . If it's not broke .....upgrade it 😊 1 Quote Link to comment Share on other sites More sharing options...
charleseaton1 Posted July 10, 2016 Share Posted July 10, 2016 Would the unequal headers off a turbo classic fit a none turbo classic Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted July 10, 2016 Share Posted July 10, 2016 Not without a fair bit of modification as the turbo exhaust manifold, upipe and downpipe takes a different route compared to the na versions. Have a search on here as there's a thread "somewhere" on here that has pics of the header differences. If it's not broke .....upgrade it 😊 1 Quote Link to comment Share on other sites More sharing options...
quit Posted July 10, 2016 Share Posted July 10, 2016 Sport bits are always expensive ! Quote Link to comment Share on other sites More sharing options...
charleseaton1 Posted July 11, 2016 Share Posted July 11, 2016 I have found one for a sport on eBay for £169 so ordered that so hopefully get that on weekend Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.