Jump to content

Nightmare help needed


Soctty
 Share

Recommended Posts

Hi Scooby wizards 

Right guys serious help needed might take a while but will start from the beginning.

First off heads went on my motor after heater matrix let go as well. I had stripped the whole dash out to fit upgraded heater matrix, I had a spare engine which I had stripped and rebuilt completely as it had sat for about 4 years. Cleaned the engine bay and sprayed the bay. Refitted the new engine connected everything up started it and on choke it runs fine as soon as it’s off it’s hunting and rough idling. Dash came up with code 24 which is idle control valve and temperature sensor code. Decided to swap idle control valve from the old engine as I know it was working and nothing, along with after changing TPS as well, and still done exactly the same. 

 

I have removed wiring to get it tested by someone as electrics are a weak point for me tbh and if anybody knows anyone who is really good with wiring looms local to Warwick if possible could you put me in touch with them. Just wanted to know if anybody else had any other suggestions or ideas? 

Its a Subaru Impreza classic 94 ej20 

 

thanks in advance peeps

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support