JusNoGood Posted May 26, 2014 Share Posted May 26, 2014 Looks like my cars previous owner has tried to repaint the wheels while still on the car - I say that as it doesn't look like he has rotated them and so missed bits. I have a silver blob and I actually think the wheels look nicer when they have a bit of brake dust on them and are a bit darker. Not black but dark grey. Money has been slipping through my fingers at a crazy speed recently and I don't have the money for a new set of wheels. I did stumble upon the plasti dip metallic YouTube vids and thought that might be just the ticket. Has anyone tried this and what were the results? Go got the impression you can get a great finish if you have the knack. Quote Link to comment Share on other sites More sharing options...
4758nigel Posted May 26, 2014 Share Posted May 26, 2014 not tried it myself but after watching a video on youtube it looks really easy to do but tbh i think i'd take the wheels off to do it rather than spraying them on the car that way i can avoid having to cover the calipers etc with plastic Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted May 26, 2014 Author Share Posted May 26, 2014 Yes, I agree. Although they do have a nice easy tip of using a bin liner cut down one side then fed through to cover up the discs and callipers. I like this effect. They use a base coat of black then metallic silver over the top. Very similar to the colour I had in mind :) Quote Link to comment Share on other sites More sharing options...
mfnick Posted May 27, 2014 Share Posted May 27, 2014 I've been thinking of getting some of this Plasti dip stuff. I've read some great stuff about it and really does sound easy and gets good reviews. Going to use it to sort my old wheels that I took off - either for winter or to help sell. May even end up putting them back on since one of my TD's is buckled and struggling to get another. Quote Link to comment Share on other sites More sharing options...
Snoop-y Posted November 6, 2014 Share Posted November 6, 2014 We are using plastidip for other parts as well: 1 Quote Link to comment Share on other sites More sharing options...
quit Posted November 6, 2014 Share Posted November 6, 2014 It's hotrud stuff if done wrong Quote Link to comment Share on other sites More sharing options...
salsa-king Posted November 6, 2014 Share Posted November 6, 2014 can look good when done right, needs loads of coats to make it easy to peel though. Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted November 6, 2014 Author Share Posted November 6, 2014 We are using plastidip for other parts as well: Looks great. How long does it last on wheels? Quote Link to comment Share on other sites More sharing options...
Snoop-y Posted November 6, 2014 Share Posted November 6, 2014 Looks great. How long does it last on wheels? Until you take it off ( not easy to pill ) or you kerb it down ;) 1 Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted November 7, 2014 Author Share Posted November 7, 2014 bout 5 mins when the mrs drives it then 1 Quote Link to comment Share on other sites More sharing options...
Gambit Posted November 7, 2014 Share Posted November 7, 2014 bout 5 mins when the mrs drives it then Whhhhhat you let your wife drive the scoob.? ;) 1 Quote Link to comment Share on other sites More sharing options...
Snoop-y Posted November 7, 2014 Share Posted November 7, 2014 Whhhhhat you let your wife drive the scoob.? ;) Ehhee :D BTW I need to refurbish my wheels :( The previous owner did a nasty work on them :( After I wrap them in Plastidip. That will do the trick. Could you recommend somebody to do the refurbish? Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted November 7, 2014 Author Share Posted November 7, 2014 Ehhee :D BTW I need to refurbish my wheels :( The previous owner did a nasty work on them :( After I wrap them in Plastidip. That will do the trick. Could you recommend somebody to do the refurbish? I found someone in Crawley who came highly recommended. They sand blast, then repair, then three layers of paint then layer of lacquer. I think it was £65+vat a wheel! http://www.wheelworksuk.co.uk/faq.php#howlong I've not used them yet but the guy on the phone was very helpful and gave me the impression they'd do a great job....just can't bring myself to spend 320ish (incl vat) for all four! Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted November 7, 2014 Author Share Posted November 7, 2014 Whhhhhat you let your wife drive the scoob.? ;) She hates to drive it so I make her especially when we go to the pub ;) 1 Quote Link to comment Share on other sites More sharing options...
Snoop-y Posted November 7, 2014 Share Posted November 7, 2014 I found someone in Crawley who came highly recommended. They sand blast, then repair, then three layers of paint then layer of lacquer. I think it was £65+vat a wheel! http://www.wheelworksuk.co.uk/faq.php#howlong I've not used them yet but the guy on the phone was very helpful and gave me the impression they'd do a great job....just can't bring myself to spend 320ish (incl vat) for all four! I have Prodrive wheels so might worth it to get them done nicely. Thanks for the info ;) Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted November 7, 2014 Author Share Posted November 7, 2014 I have Prodrive wheels so might worth it to get them done nicely. Thanks for the info ;) ah yea nice. I was thinking I'd probably buy some 2nd hand prodrives instead of paying the £320 for tarting up boring standard wheels. Are you a member of SurreyScoobies.co.uk ? Great set of guys with loads of local knowledge. Quote Link to comment Share on other sites More sharing options...
Gambit Posted November 7, 2014 Share Posted November 7, 2014 Same for me I have the UK300 Prodrive wheels I want to get them refurbished I did them myself as a quick fix last year but really needs doing properly. Quote Link to comment Share on other sites More sharing options...
salsa-king Posted November 7, 2014 Share Posted November 7, 2014 I found someone in Crawley who came highly recommended. They sand blast, then repair, then three layers of paint then layer of lacquer. I think it was £65+vat a wheel! http://www.wheelworksuk.co.uk/faq.php#howlong I've not used them yet but the guy on the phone was very helpful and gave me the impression they'd do a great job....just can't bring myself to spend 320ish (incl vat) for all four! I had my 17"s blasted & powder coated... £200+vat (£240) include re fit and re balance too. ral2009 edit by salsa-king, on Flickr 1 Quote Link to comment Share on other sites More sharing options...
Snoop-y Posted November 7, 2014 Share Posted November 7, 2014 ah yea nice. I was thinking I'd probably buy some 2nd hand prodrives instead of paying the £320 for tarting up boring standard wheels. Are you a member of SurreyScoobies.co.uk ? Great set of guys with loads of local knowledge. Thanks for the info I'll have a look ;) 1 Quote Link to comment Share on other sites More sharing options...
JusNoGood Posted November 8, 2014 Author Share Posted November 8, 2014 I had my 17"s blasted & powder coated... £200+vat (£240) include re fit and re balance too. ral2009 edit by salsa-king, on Flickr That's a lot more reasonable....where was that done mate? Quote Link to comment Share on other sites More sharing options...
quit Posted November 8, 2014 Share Posted November 8, 2014 I'm looking at having mine powder coated and hydro dipped Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.