dankane25 Posted June 17, 2014 Share Posted June 17, 2014 hi, does anyone know how to remove a crank case water jacket bolt thats been rounded out. Quote Link to comment Share on other sites More sharing options...
Scooby Pete Posted June 17, 2014 Share Posted June 17, 2014 Cut the head off then screw a suitable nut down the thread followed by a 2nd nut dome up tight to the 1st nut. then undo with the spanner on the 1st nut which locks against the 2nd nut and will undo the bolt. Also handy for Removing studs. Or if you want a handy workshop gadget then invest in a set of Irwin bolt grips. http://www.irwin.com/tools/screw-bolt-extractors/5-pc-bolt-grip-expansion-set Quote Link to comment Share on other sites More sharing options...
dankane25 Posted June 17, 2014 Author Share Posted June 17, 2014 the bolt is way down in the water jacket next to the piston chamber cant get down to the head of it. Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted June 17, 2014 Share Posted June 17, 2014 The bolt grips in petes link fit onto a normal socket set extension bar . Which will allow you to reach it think a set to suit the 12mm or 14 mm(can't remember the excat size of hand ) block bolts is about £25 on eBay [emoji6] Sent from my GT-I9300 using Tapatalk Quote Link to comment Share on other sites More sharing options...
dankane25 Posted June 17, 2014 Author Share Posted June 17, 2014 cheers guys, ill get some ordered and see if it does the job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.