Going to spray the new intercooler tomorrow then install it.Apart from trying to find some angle to make a bracket up,is it straight forward to fit and will it effect the running of the car?I do plan to get a td05 soon and then get remapped.Cheers

Newage Wrx intercooler ?

Its off a bugeye matt

Normally a pain to fit, have you all the pipework ready, I'd do a mock up. Then measure and re measure as theres usually some cutting of the inner wing or front beam,

And expect some increased lag from the extra length involved.

Take a load of pics along the way do a write up on here if you have the time :-D

Cheers.Typical-not straight forward then.I might wait till ive got a tdo5 then fit everything all at once.

It's strait forward apart from the brackets

Oh dear conflicting answers...   Do any of the diy shops sell angle iron? to make these brackets up

If it's a Wrx top mount it's pretty simple if you got the y pipe with it , you need a newage dump valve / compatible plate

Wouldn't use iron ! Use ali

OOps I meant alli?

Sorry my fault I was assuming it was a fmic :O

Ive got a baileys d/v on the standard cooler at the moment,where do I get a compatible plate from and how much do they cost.I have the y pipe as well.Thanks

Put the Bailey in the bin mate

So what would you sugguest then matt?

Forge or hks mate

so its a forge or hks for a newage 2001 onwards then?

Yeah mines off a blob mate

Is this any good? http://www.ebay.co.uk/itm/subaru-impreza-newage-hks-ssqv-bolt-on-blow-off-valve-/301342306881?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item462966b241

Beware: There are some HKS SSQV fakes around with poor quality powder coat paint, without the "R" for registered next and above the HKS name brand. The HKS fake is a faded brand name rather than crisp and clear with the legitimate one. Also, the cir-clips are stainless steel with the HKS real one rather than steel for the fake one.

Cheers for that dino

http://uk.subaruownersclub.com/forums/topic/5234-hks-ssqv-dump-valve-real-or-fake/#entry29542

Some pics to help

Cheers stants,good reading very interesting.Conning Baskets!

I know, thats the Chinese for you, prob madenin the same factory haha