Gambit

We always recommend people to have a really good look around for one before buying. I know both the cars in the garage I spent days maybe weeks looking for the right ones. And even went to the limits of traveling around until I was completely happy :) So whats your 1st set of plans to do :) I will pre warn you once you start it becomes extremely addictive and if you're like me the plans just get bigger and bigger :D

No worries mate :) Like I said worth a double post :D

My bad sense of humour here the reflexion made me laugh look like an angry dwarf It's ok the meds will kick in soon ;)

How much you after for that mate I might be interested in it. Might mean the suspension on the blobeye will have to keep annoying me some more but I'm sure I can live with that :D

Yep bit late with this one mate it's in the other thread ;) But good enough to be posted more than once :)

Oh I will give Steve and email he might be sorting it now but just so I know.

Try this link mate If it works I will update Steves link

Nice job Steve :) A Lot sooner than I thought it was going to be :)

Pinched this for you mate as I'm not sure with the bolt size and will hopefully help you :) You could always do a how to for our how to section for others at a later date ;) Newage TMIC Newage dump valve hose Flat aluminum bar (about 80mm x 20mm) to act as bridging plate You will also need a slightly larger jubilee clip for d/v hose 1. Remove intercooler and swap i/c hose assy to the new i/c, unless you have a Samco /Prodrive one. 2. Remove o/e d/v hose 3. Remove small rubber hose between induction piping and o/e d/v alloy tubing. In an ideal world, this alloy tube should be removed, but looking at how it is fixed, there are some brackets fixed to the inlet manifold, so I left the pipe in place. It doesn't cause any issues) You can see the induction pipe d/v return (Black plastic tube behind turbo) and the aluminium return hose (shiney tube) The rubber hose between them is the one that is removed. 4. Fit newage d/v hose to the Black plastic hose shown above leaving the end ready to accept the new d/v. I secured the hose with a jubilee clip rather than the awkward circular clip. 5.Remove r/h/s i/c bracket (it needs to be bent to fit the new i/c and one of the holes elongating) 6. Place newage i\c into position. You will notice that the l/h/s bracket falls about 50mm short of the i/c bracket. You will need to construct a small bridging plate from a flat bar and drill a 10mm hole at either ends .Then fix the l/h/s of the i/c using the bracket. 7. Place r\h bracket into position and note how it requires bending to make it fit, then place it on the floor and tap away. Elongate hole to allow it to be fitted to the engine. 8. Fit r/h bracket to the i/c and engine. 9. Ensure d/v hose connected and check all connections and tighten all jubilee clips. This may not be the most popular mod as most go for the STI i/c, but the WRX intercooler is noticeably larger. Next will be the newage undertray and Samco i/c hose (classic).

A lot better mate good video :)

Well just finalising things so shouldn't be long now mate still trying to add more to the list might have seen a few people sign up on the forum Carben fibre, Subarubits, SubaruWorx. just to name a few hoping they will be adding to the list already spoke with them and they have all agreed to do discounts anyway for members with more to come. Not sure whats going on with Kwikfit seem to be dragging !Removed! a bit not so quick so that might be a no. But either way hopefully be something to benefit everyone :D

Hey Rob welcome to S.O.C And what I like to hear no messing about straight into a club stand, we need more people like you :D And car looks great mate very clean and untouched ideal for starting off with to make it your own by putting your personal touches on it :)

Nope 15% :)

Any bolts should fit it mate but should get a flange of some sort behind it :)

Don't blame you but I appreciate needs must :(

Shouldn't be long mate before the Premium memberships go live :)

Like Boot's said take very dark glasses B)

Didn't Toyota have to have a few cars recalled not that long ago :(

Only thing it says is it excludes bikes with 10% off already, so I guess so :D

Looks great mate. Is that the The Yorkshire Air Ambulance thing. I know a few of the members went from here :D

Cheers Tim :)

Whaaaaat!! I'm supposed to get paid for this ? I will have to go back and read the small print And no I know Simon's spot on was more for Advertisement purposes I was going to offer it for :D But I will solely leave that up to him if he wants to or not :)

Still got a bit of caveman in ya ;)

Funny enough I was going to ask Simon if he wanted to be put on this list http://uk.subaruownersclub.com/discounts/ But I will speak via PM about that :D And just point out I'm not an Admin. "With great power comes great responsibility" So old Uncle Ben used to say. And I would just abuse it And I don't think the owner trusts me enough ;)

Just letting you know they have arrived now so shouldn't be long before we can get it live :D