Gambit

Shame it's a classic I see someone on fakebook needing a engine but it's new age :(

No worriesmate hope it help's but I'll keep an eye also :)

I'd take it off and have a look see if the spring is slack or tight. Check the seal too make sure it's not cracked/split and that it's all tight. Just to rule out the DV is dead. I know I had a cheap one that I was trying to see if the cars would run with one on and it did the same. :(

I know a few :D I think being the newer hatch is the only problem, just don't see many getting broken. But still worth a shot :) SCOOBY SPARES LTD Unit 1 siding road Fleetwood Lancashire FY7 6NS TEL: 01253 871188 TEXT: 07854776648 Email: [email protected] Web: www.scoobyspares.com Matty is spot on I use him for most things now :) MB developments Unit 3 Addenbrook street Darlaston Ws10 8hj call or txt for quicker reply 07785942237 East Kent Subaru Spares 01227 860843 [email protected] Mon - Fri 9.30am - 5.30pm & Sat - 10.30am - 4.30pm Few on facebook but never found them to be of any help and pretty rude :( And doubt they will have anything like that either as they're very small time compared to the above :)

Hi mate welcome to S.O.C I'd try some breakers for the books or the normal places like fleebay Gumtree. :)

Well done this today just to finish off the carbon wrap :)

I did set up a Google map where people could pin themselves Found it only me and miggs had done it but can make this more of a sticky if it works ok :) https://www.google.co.uk/maps/@53.7590246,0.4693695,6.5z/data=!4m2!6m1!1szFePCYhc2ovY.k34ftlmDQhf4

I must admit I do like the site of a bunch of scoobs rolling down the road lol

Didn't last time mate just all arranged to meet with any local members and headed in.

Give us a couple of quid for postage mate I'm more than happy for you to have them :) They still have the bolts on that was fitted I'll get a picture for you later mate :D

I had some on my rear's that was cut out I still have them actuality could use them as a template if you like :) But they was just bolted on with out the metal supports. Currently looking at get in some more flaps myself but I won't be using the old ones I've taken off. :)

Nice coming along nicely.

Give Dan a ring mate down railway Street or I can see what he will charge ya if you like with fitting. But I drove through to Sheffield to let Martin do mine at Sheffield Subaru services. Had a cheeky nandos too lol. Think he charged me 280 supplied and fitted. With a skimmed flywheel.

Be just the mounts and not sure I'll have to ask him :D

fair few camping too :D

Whiteline 22mm in sti pink brand new whiteline droplinks used £160 all in Full Polybush front end £140 Group n mounts £80 Group n pitch £40 ​Posting on behalf of Brock.

Address: The Jug & Bottle Louth Road Holton Le Clay Grimsby DN36 5YN Meet times 6pm-9pm 1st September 2015 Google Map The Jug & Bottle:Facebook Website Right Guys/Gals Sorry about Augusts meet unfortunately The New Inn appears it wasn't working out as a meeting point. So means we haven't had one. So to try help with this, we now have a new place super easy to get too straight in off the A16 on the 1st of September. And the best bit they do Carvery meals :D Like all our meets this isn't just for S.O.C (Subaru Owners Club) all clubs welcome to join to meet new and old faces locally :) Hope to see you there. Happy Burbling ;) Meeting Rules 1. No idiotic driving on the roads surrounding the Meeting your behaviour represents us as a whole. 2. No leaving litter. 3. Do not partake in any other idiotic behaviour. 4. Have fun and meet fellow Subaru owners. :) And as always a big THANK YOU to the owner's/management and staff at The Jug & Bottle.

I did the same but used bits of wood to drive onto starting lower than going up a bit until I could get the jack under. Sent from my SM-G920F using Tapatalk

His welcome to the forum. As said above get stuck in. We're all friendly here so don't be afraid to ask even if you think it's stupid. [emoji6] Sent from my SM-G920F using Tapatalk

Might try it out. !Removed! predicted text seafood lol. [emoji1] Sent from my SM-G920F using Tapatalk

With seafood don't you have to do an oil and filter change straight after too. I've not used either. Product been tempted with the seafoam before. Sent from my SM-G920F using Tapatalk

Nice one. I'll get you marked if I've not done it already when I get home on pc. Sent from my SM-G920F using Tapatalk

Carvery can't go wrong :D

I have and I've managed to get the Jug And Bottle looking at doing the 1st next month and look at going back to the 2nd Tuesday or Wednesday after that. But the new car won't be there :( It's having work done :(

Good man one way around it lol