You tried grade A ?

Or there's jap performance parts

Haven't tried east Kent will take a look 

scanned through all of grade a stock on ebay and nothing so will send an email and see if anything is lurking about. 

will take a look at JPP  they're just down the road from me but always found they are too expensive. 

Nothing on JPP or East Kent unfortunately 

Had a chat with MB Developments - advised me that they have never had a problem with Japspeed DP - these sell on ebay for £130 I think

I guess that this is my best option?

Anyone else had one of these fitted?

Have a look on eBay for anyone breaking a car. Just send them a message asking if they have the pipe. Many bargains to be had.

Yeah sent a few messages out there - also after a decat up-pipe now too - might as well do the whole lot while I am there

I have the uppipe for you. Not me but hold fire.

Shame about Japseed we get discount with them.

Thanks Sccobyghost

We get discount with JapSpeed? How do I use that - my MB Developments said that they were fine to use so I think I am going to give them a go for the DP now. I believe they sell on eBay for £130 or £150 need to double check tonight

Found the thread on forum for how to get discount so dw

enquiry sent and hopefully they have some bolts I can purchase too as i can only imagine the 13 year old bolts on both up & dp aren't going to go back on 😳

Get yourself a genuine subaru gasket set will save loads of problems later on, import car parts do them as a set

I bought a genuine gasket set about a year ago with my afterburner. Wasn't sure what I needed so ended up getting turbo:DP One with it. If I get a hold of a up pipe will need all new gaskets for that though. 

Anyone know where I can get all the bolts?

http://www.ebay.co.uk/itm/M10-x-1-25-Metric-Fine-8-8-Grade-High-Tensile-Yellow-Zinc-Hex-Head-Bolts-Sets-/371098507574?var=&hash=item566731d936:m:mL6yBF1arZqceY1eWFLk_Xg

Here is what I have come up with M10 1.25 40mm for the Turbo to DP - can anyone confirm this is correct? I believe I need 5 of these...Anyone know what bolts I will need for up pipe?

http://www.importcarparts.co.uk/parts-info?id=8750&cat=96&sub=183&sec=277&var=51&dc=0&gen=&searchKey=&searchPart=

Thanks stants that's perfect I'll get that on order. 

Anywhere that sells the 5 nuts and bolts needed for dp as a set?

I'm sure down pipe are all studs so just need to GET SOME NUTS!

Haha now I can only picture you looking like mr T :L

soooo... Stupid question of the day - huh? I only need nuts? Is that 5 of the following?

http://www.importcarparts.co.uk/parts-info?id=12291&cat=96&sub=183&sec=277&var=51&dc=0&gen=&searchKey=&searchPart=

Or

http://www.importcarparts.co.uk/parts-info?id=8753&cat=96&sub=183&sec=277&var=51&dc=0&gen=&searchKey=&searchPart=

Chances are the second link but for safety get your head under the bonnet and have a look down the back of the turbo. Snap some pics and share if you feel unsure.