Water temp sensor location

[Youngy]

As above where abouts is the temp sensor on a uk 2000 t reg thanks 

[stants]

It's in the water cross over pipe underneath the intake manifold, if you remove the alternator you should be able to see it,

There's two one for the ecu and one for the dash display

Sent from my SM-G930F using Tapatalk

[Youngy]

Ok I might leave it for a bit coz it was only for another water gauge so I can keep a proper eye on it 

[Scoobyghost]

For aftermarket water temp gauge I think the route is to cut the top rad hose in half and stick an adapter in there that takes the sensor.

[Youngy]

That is another way then I will have a look for the adapted then 

[stants]

http://www.scoobyparts.com/mishimoto-water-temperature-top-hose-adaptor

Obviously there are cheaper ones that do the same job, this was 1st one I came to

Sent from my SM-G930F using Tapatalk