wrxstandard Posted March 2, 2017 Share Posted March 2, 2017 Peeps, question; whats a good decent set for my wrx blob? Is rally armour the only option...or any other suggestions? █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
wrxstandard Posted March 2, 2017 Author Share Posted March 2, 2017 Anyone used Rally FlapZ? █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
Cocker-Leachy Posted March 2, 2017 Share Posted March 2, 2017 I'll be getting rallyflapz. spoke with Ian today hopefully sorting some out this weekend. Theres a couple of threads on here with people who have them. 1 Quote Link to comment Share on other sites More sharing options...
wrxstandard Posted March 2, 2017 Author Share Posted March 2, 2017 Any good ideas for a colour for my grey Blob? Should i go black? █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 3, 2017 Share Posted March 3, 2017 I've ordered these... will get them fitted next week: http://scoobyworld.co.uk/catalog/product_info.php?cPath=199_353_354&products_id=2623 Quote Link to comment Share on other sites More sharing options...
wrxstandard Posted March 3, 2017 Author Share Posted March 3, 2017 Let me know how they look. Pics please █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 3, 2017 Share Posted March 3, 2017 9 minutes ago, wrxstandard said: Let me know how they look. Pics please █ W █ R █ X █ Will do mate Quote Link to comment Share on other sites More sharing options...
aucky Posted March 3, 2017 Share Posted March 3, 2017 20 hours ago, wrxstandard said: Anyone used Rally FlapZ? █ W █ R █ X █ i have rallyflapsz on my hatch,better then rally armour as they are longer so can place them high up wheel arch to protect side car,i had rally armour on my other hatch and they was useless at stopping crap from front wheels hitting side car. 1 Quote Link to comment Share on other sites More sharing options...
Cocker-Leachy Posted March 4, 2017 Share Posted March 4, 2017 On 02/03/2017 at 9:32 PM, wrxstandard said: Anyone used Rally FlapZ? █ W █ R █ X █ Picked some up today 2nd gen with small red wrx logos. Look sweet, hopefully get them on tommorow. 👍 Quote Link to comment Share on other sites More sharing options...
wrxstandard Posted March 7, 2017 Author Share Posted March 7, 2017 Anyone had their Rally Flaps on a blob eye fitted recently? Anyone seen the mini size ones... █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 7, 2017 Share Posted March 7, 2017 I've got my mini mud flaps but the weather hasn't been kind so not been able to fit them yet Quote Link to comment Share on other sites More sharing options...
Rps Posted March 7, 2017 Share Posted March 7, 2017 These are scoobyworld ones too 1 Quote Link to comment Share on other sites More sharing options...
wrxstandard Posted March 7, 2017 Author Share Posted March 7, 2017 These are scoobyworld ones too Amazing █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
Rps Posted March 7, 2017 Share Posted March 7, 2017 I wouldnt go that far there just blue bits of rubber lol Quote Link to comment Share on other sites More sharing options...
wrxstandard Posted March 7, 2017 Author Share Posted March 7, 2017 Really stands the car off, blue looks spot on. Just need to sort those rear bumper trims out. [emoji106] █ W █ R █ X █ Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 8, 2017 Share Posted March 8, 2017 Well just tried to fit mine... it would seem I would need to do some drilling as there is no existing hole for the bottom part of the mudflap to be installed onto?!? Same story for the front as well... Edit: Just checked the scoobyworld page, they say that there is no need to drill holes... No clue where to screw in the bottom section then Quote Link to comment Share on other sites More sharing options...
aucky Posted March 8, 2017 Share Posted March 8, 2017 1 hour ago, Sandals said: Well just tried to fit mine... it would seem I would need to do some drilling as there is no existing hole for the bottom part of the mudflap to be installed onto?!? Same story for the front as well... Edit: Just checked the scoobyworld page, they say that there is no need to drill holes... No clue where to screw in the bottom section then are you putting the front on the back and the back on the front Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 8, 2017 Share Posted March 8, 2017 43 minutes ago, aucky said: are you putting the front on the back and the back on the front According to the instructions... nope, but now you've made me think it would fit the wrong way around. Edit: Just checked, even looking at swapping them round... it's a no go. Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 8, 2017 Share Posted March 8, 2017 Well here's the response from Scooby World: Hi, There is no mount for the hole in the bottom of the mudflap. Instead we provide a self tapping screw to fasten it to the plastic of the wheel arch. If you refer to the instructions that may explain it better than myself. You should be able to screw it in by hand with a screwdriver, a drill isn’t needed. a drill isn't needed coz apparently you need to screw straight into the plastic of the bumper... here are the in depth instructions Do you have to do any drilling or any !Removed! into plastic with the rally flaps? Quote Link to comment Share on other sites More sharing options...
quit Posted March 8, 2017 Share Posted March 8, 2017 i just screwed mine in Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 8, 2017 Share Posted March 8, 2017 Yeh I think I'll just keep them and screw them into the plastic... I have no intention on taking them off again and can't be bothered with the hassle of sending them back. Just a bit disappointed that the advert states that no drilling is required. Made me think that it uses existing holes. Also lol at the swear filter removing the word scre wing XD Quote Link to comment Share on other sites More sharing options...
aucky Posted March 8, 2017 Share Posted March 8, 2017 Well here's the response from Scooby World: Hi, There is no mount for the hole in the bottom of the mudflap. Instead we provide a self tapping screw to fasten it to the plastic of the wheel arch. If you refer to the instructions that may explain it better than myself. You should be able to screw it in by hand with a screwdriver, a drill isn’t needed. a drill isn't needed coz apparently you need to screw straight into the plastic of the bumper... here are the in depth instructions Do you have to do any drilling or any !Removed! into plastic with the rally flaps? I got the universal fit rallyflapz so they come with no holes in them.i just drilled holes in to mach the plastic plug holes on bumper and got some proper nuts and bolts to hold them on instead plastic things they came with. Sent from my LG-D855 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 9, 2017 Share Posted March 9, 2017 What a ball ache that was... over two hours later and finally done! Quote Link to comment Share on other sites More sharing options...
david1972 Posted March 9, 2017 Share Posted March 9, 2017 I drilled small pilot holes for mine, then used the self tappers that came with them. Bit fiddly at first but look the business and took little time after the first one [emoji106] Sent from my iphone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sandals Posted March 9, 2017 Share Posted March 9, 2017 24 minutes ago, david1972 said: I drilled small pilot holes for mine, then used the self tappers that came with them. Bit fiddly at first but look the business and took little time after the first one Sent from my iPhone using Tapatalk Yeh, they were advertised as no need to drill holes or take the wheels off! Well... didn't have to drill holes but there was no danger of being able to screw straight into the plastic with the wheel in the way! I'm glad it's over.... 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.