Marshffs Posted July 13, 2018 Share Posted July 13, 2018 Anyone tell me why my rear passenger wheel has a slight camber on it? Drivers rear is spot on but other is a mile out. There is a slight knock noise on that back corner aswel. Will the trailing arm bush cause it to camber like that if its worn or knackered? Im thinking my suspension strut is bent. Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted July 14, 2018 Share Posted July 14, 2018 22 hours ago, Marshffs said: Anyone tell me why my rear passenger wheel has a slight camber on it? Drivers rear is spot on but other is a mile out. There is a slight knock noise on that back corner aswel. Will the trailing arm bush cause it to camber like that if its worn or knackered? Im thinking my suspension strut is bent. Are you lowered at all? , and I know this seems stupid but is it parked of a flat Quote Link to comment Share on other sites More sharing options...
Marshffs Posted July 14, 2018 Author Share Posted July 14, 2018 Its no matter where im parkerd mate. They aint atandard spring but unsure what drop it is. Quote Link to comment Share on other sites More sharing options...
kershaw-330s Posted July 14, 2018 Share Posted July 14, 2018 If your lowered you will get uneven camber on the rear , not sure how much if any adjustability you have on the rear , obv get it checked out that nothings bent but you probably just need some camber bolts to straiten everything up again Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted July 15, 2018 Share Posted July 15, 2018 Put it on a 4 wheel alignment gadget. Does the rear have camber bolts? Quote Link to comment Share on other sites More sharing options...
Mr B Posted July 15, 2018 Share Posted July 15, 2018 No camber adjustment on rear from factory . trailing arm won't effect it but badly worn/ damaged lateral links would as does worn strut rod bearing and top mount issue . all easy check, camber bolts easy solution for fine adjustment once suspension accessed good. Quote Link to comment Share on other sites More sharing options...
Marshffs Posted July 17, 2018 Author Share Posted July 17, 2018 Whats a strut rod bearing? Been in numerous garages to find the cause and as of yet there seems to be no fault. Iv got a hub coming to change that over, next will be suspension then ill do the lateral links. Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted July 17, 2018 Share Posted July 17, 2018 Do you have a print out of the alignment? Quote Link to comment Share on other sites More sharing options...
Mr B Posted July 17, 2018 Share Posted July 17, 2018 38 minutes ago, Marshffs said: Whats a strut rod bearing? Been in numerous garages to find the cause and as of yet there seems to be no fault. Iv got a hub coming to change that over, next will be suspension then ill do the lateral links. bushing on the chromed rod, as these wear it can cause a bit of neg camber but they normally leak if getting bad . Could be just way that one is, possible could be improved to some extent by loosening strut to hub bolts and pulling hub upright as much as slop allows . Even with no parts fault if want perfect camber then camber bolts a must . Quote Link to comment Share on other sites More sharing options...
Marshffs Posted July 17, 2018 Author Share Posted July 17, 2018 I have a slight knock on that corner aswel so maybe that what you have said. anyone have any rear struts lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.