AC72 Posted January 29, 2022 Share Posted January 29, 2022 Just doing the head gaskets on my 06 Forester XT and none of the usual tricks for locking the cam pulleys to remove the 10mm hex are working so going to have to resort to proper tools. Rather than buying them for a probably one-time job I was wondering if anyone had a set they would like to rent to me - I’m happy to leave a big deposit (oh-er) and pay postage both directions. I’d be after the AVCS intake cam and normal static exhaust cam tools. Quote Link to comment Share on other sites More sharing options...
Mr B Posted January 30, 2022 Share Posted January 30, 2022 simplest trick is make tool using old cam belt . Quote Link to comment Share on other sites More sharing options...
AC72 Posted January 30, 2022 Author Share Posted January 30, 2022 Tried the usual with mole grips around the old belt but they weren’t holding against the 4ft breaker bar 😕. I suppose I could try to make something with a bit of steel bar and bolt through the old belt into a loop but to be fair these cam bolts haven’t been moved in 16 years and it shows! Quote Link to comment Share on other sites More sharing options...
Mr B Posted January 31, 2022 Share Posted January 31, 2022 use a piece of wood and screw belt into sides of it. that about simplest diy simple tool option you can make a really nice tool if got a welder or can use thick angle iron and cut notches in it to slip belt in and out of . main thing that keeps them tight is factory loctite, bit of heat from plumbers style gas torch can help, don't go mad on heat hough or ruin cam seal . Quote Link to comment Share on other sites More sharing options...
Jay762 Posted February 1, 2022 Share Posted February 1, 2022 Saw this recently - A simple approach Quote Link to comment Share on other sites More sharing options...
Mr B Posted February 1, 2022 Share Posted February 1, 2022 That a really clever alignment tool idea, perfect solution for alignment but not good for holding pulley for removal or fitting of bolt . Main thing got be careful of when holding pulley to remove tight bolt is whatever method you using doesn't damage teeth edges on pulley . 1 Quote Link to comment Share on other sites More sharing options...
AC72 Posted February 10, 2022 Author Share Posted February 10, 2022 Thanks all, ended up getting the proper tools from Import Car Parts, a lot cheaper than the Company 23 ones and had all 4 pulleys off in 5 minutes - they were f'in tight though - breaker bar plus extension. The nut and bolt trick looks useful for when I put it back together this weekend. Once it's all buttoned-up if anyone around Cambridge area needs to borrow these tools, just get in-touch. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.