Davesoarer Posted August 9, 2022 Share Posted August 9, 2022 Hi I am looking at tuning my Sti but cannot find an ecu I can use. Cobb say they do not plan on an accessport for the UK market. Please can someone help? TYI Dave Quote Link to comment Share on other sites More sharing options...
Tidgy Posted August 12, 2022 Share Posted August 12, 2022 Hi, the stock ecu can be mapped using software, ecutek is recomended. Custom or tek3 maps as they used to be know as are done specificly to your car either on a rolling road (dyno) or on road, which personaly id stay away from. Decent specialist will be able to do it for you. I use scoobyclinic up atchesterfield for all my work and highly recomend them, but its a bit more a of a trek for you i expect. One word of warning is to stay away from anyone who uses a guy called Duncan Graham, aka racedynamix, proper cowboy. Quote Link to comment Share on other sites More sharing options...
Siluro Posted August 14, 2022 Share Posted August 14, 2022 Never miss an opportunity to plug Duncan. What did he do out of interest? Is there a thread somewhere. Fingers crossed 25000K later still doing fine but you keep putting the wind up me. BTW my reasoning for using Duncan was based on the fact he did it RCM which was also fairly local. I expected RCM to at least have some standards. I guess they just rent him the road. Quote Link to comment Share on other sites More sharing options...
Tidgy Posted August 21, 2022 Share Posted August 21, 2022 On 8/14/2022 at 8:04 AM, Siluro said: Never miss an opportunity to plug Duncan. What did he do out of interest? Is there a thread somewhere. Fingers crossed 25000K later still doing fine but you keep putting the wind up me. BTW my reasoning for using Duncan was based on the fact he did it RCM which was also fairly local. I expected RCM to at least have some standards. I guess they just rent him the road. nope lol, seen his working methods, his bad tech advice and seen him rip people off, one of the guys on here found out the hard way. He doesnt road test after dyno maps He claims he can map round sensor faults He block books 10 cars in a day If something goes wrong he just goes awol Every tuner/mapper has an issue now and again so if they stand up and put it right then no issue, but he's be told several times by some of the best tuners in the country his methods are bad, but he doesnt listen, Andy forrest labelled him Dung khan by the way. Quote Link to comment Share on other sites More sharing options...
Siluro Posted August 29, 2022 Share Posted August 29, 2022 He did not road test mine and that something I never thought about until speaking to you. I agree that should be done. Quote Link to comment Share on other sites More sharing options...
akewahlberg Posted September 13, 2022 Share Posted September 13, 2022 Hi I Have a EJ20 DOHC WRX engine and I use ECU Master works fine 236hp at 0,8 bar. I have question is it possible the trace an engine serialnumber to verify origin my engine s/n is EJ20-938871 WRX 96-97 ? Do you know where I should be looking ? Thanks Quote Link to comment Share on other sites More sharing options...
Davesoarer Posted January 9, 2023 Author Share Posted January 9, 2023 On 8/12/2022 at 9:16 AM, Tidgy said: Hi, the stock ecu can be mapped using software, ecutek is recomended. Custom or tek3 maps as they used to be know as are done specificly to your car either on a rolling road (dyno) or on road, which personaly id stay away from. Decent specialist will be able to do it for you. I use scoobyclinic up atchesterfield for all my work and highly recomend them, but its a bit more a of a trek for you i expect. One word of warning is to stay away from anyone who uses a guy called Duncan Graham, aka racedynamix, proper cowboy. Sorry late reply, thank you I will take a look at them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.