Jump to content

Tow bar fitted to the outback


Th4neuk
 Share

Recommended Posts

Just at louth tow bar centre having a tow bar fitted to the outback. Whole back end of the car is off! Wouldn't fancy this as a diy. Thanks for the recomendation gambit :-) the guy who owns it has an impreza and his son has an impreza wagon lol. Mini scooby meet lol.

Price is very good as well.

Cheers

Alan

  • Like 1
Link to comment
Share on other sites

Did mine myself. Hardest bit was working out how the rear bumber was held on then getting the !Removed! connectors undone.

After that it only took half an hour to bolt everything on and connect the plug and play loom.

Link to comment
Share on other sites

  • 2 weeks later...

Once you work out where the various bolts and plastic rivets are located its a doddle. Took me an hour but now I know how I could do it in ten minutes. The hardest bolts to get to are the ones up under the rear wheel arches behind the plastic splash panels. There are also two bolts (one each side) that are accessible through the round access plugs inside the boot space. Other than that its not a hard job and you only need very basic tools.

Link to comment
Share on other sites

Reason for asking, I have an electromagnetic parking sensor kit. The sensor is a strip of tape which sticks to the inside of the bumper. Hence having to remove the bumper.

Sent from my Galaxy S 5 using Tapatalk

Link to comment
Share on other sites

My last ON had them as standard but Subaru must have dropped them on the 05 for some reason. The electromagnetic ones work better and there's no drilling. Just have to take off the bumper.

Sent from my Galaxy S 5 using Tapatalk

Link to comment
Share on other sites

They seem to just beep when they feel like it. There's a light system mounted in the boot too, green to red, I assume to countdown the distance to objects, but that too seems to have a life of its own

Link to comment
Share on other sites

Mine has the same ones. I think they are the dealer fitted ones rather than at the actual factory?

Mine did just beep then worked ok but either the towbar is fixing them or something being disturbed has made them sulk. Sdon't really use them anyway so not an issue. If you look there is a little switch on the top and this changes the volume to off/low/high.

Cheers

Alan

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support