Jump to content

dream car, nightmare problem!


yoscoob
 Share

Recommended Posts

Hey everyone!

 

I'm a long time Scooby owner (on number 3 now), first time joining a forum and i have a question.... no amount of googling can show me a thing....

 

I bought a 2010 STI Cosworth just before Christmas 2012 and have gone though 5.5 litres of oil during that time only covering 1500 miles or so. It's done 28,500 miles and been impeccably serviced but. I had it in for a service last week and engine oil was found in the coolant tank next to the rad. LOTS of oil. Not emulsified or anything - nice clean thick black engine oil coating the whole of the inside of the tank, including the inside of the cap! Doesn't look like a head gasket issue and it's running sweet as (off the road now of course!).

 

It's going in next week and should be covered by the warranty but i'm worried this could be major, major and can't find any reports of problems with the block or anything..... has anyone else heard of anything similar?

 

Gutted cos I'm in love with that car.

 

Cheers all 8o)

 

C

Link to comment
Share on other sites


Hi mate welcome to the forums. And if I do say so myself you found the best place to join for your 1st time :)

And as for the problem I've heard nothing myself either. And have no idea what the course would be to make that happen. I'm interested to what they say it is. I'm not trying to scare you but might be just a problem car. My Dad had a Granada Scorpio many year ago, and that had a problem of burning oil quick and smoking really badly even though it was a new car. Ford had there top engineers on it, my Dad went through 26 other cars that ford had to give him while they tried to sort it from, Maverick escort soft top and my favourite of them all the Probe 3.0ltr V6 :) I can't remember the total time they had the car but they did everything inc a full engine swap and it still had the same problem :wacko: In the end I think they gave him the newer full extra pack ford sierra sapphire.

Link to comment
Share on other sites

Wotcha and welcome - Kudos on the car lovely bit of kit - any time I have seen oil and water it has been emulsified as you describe, I have never heard of it being as separate as that and also to lose that amount of oil.

 

My 2p - the plumbing is cross connected - you have an engine breather pipe connected to your coolant expansion bottle or you have a fracture / failure in the head which is allowing oil into the return line.

 

Either way something like this should be sorted under warranty as it is probably an individual instance.

Link to comment
Share on other sites

Thanks for the replies guys - yes head or block are the 2 most probably (and typically most horrifying!) causes... I've got my fingers crossed for a plumbing issues though!

 

c

Link to comment
Share on other sites

Have to let us know what they say be interesting to see why its separating like it is. But I would have thought the plumbing being wrong would make the car have more problems by now

Link to comment
Share on other sites

I had a similar problem, it was down to when I replaced my Engine, I got the rocker breather pipe and the lower header tank pipe mixed up and eneded up filling the oil galleries with water. Luckily I didnt drive the car like this and spotted it before any major dmage was done.

 

Spent about £100 on oil and engine flush and put 5 litres of oil in. Ran the car for a few mins drained out the oil and repeated 5 or 6 times.

 

Scared the cr@p out of me.

 

Hopefully yours will be an easy fix.

Link to comment
Share on other sites

My baby goes in on Monday, keep'em crossed for me! I'll post what happens and thanks for the input 8o)

 

As an aside, one of my business partners took delivery of his VXR8 Bathurst today and took me out for a spin.... compared to the Cossie even that 600bhp bus seemed tame!

 

God I hope it's an easy fix!

  • Like 2
Link to comment
Share on other sites

So its a little chalk and cheese but how is the sound comparison as I do like a bit of V8 symphony and was considering a Holden ute to cart my mx's to the track?

Link to comment
Share on other sites

They certainly are chalk and cheese, my 'next' car was going to be a V8 the last 3 times a bought a car! It's an itch I'll scratch eventually I'm sure. The biggest difference between the 2 is how they sound when you're driving (or passenger). The Bathurst sounds incredible as it drives past but cos it's competition is things like big audis and m5's it has to be fairly civilised too. The cossie's an assault on the senses in comparison... love it! If the Bathurst was mine I reckon i'd be destroying it's residuals by ripping out some of the sound-proofing!

 

Never driven anything on the road that piles on speed like the Bathurst though. It just needs a dump valve!

 

A Holden ute sounds like a perfect choice Jay762 8o)

Link to comment
Share on other sites

I do like them V8 Holden myself. there is a red one drives around near me, both gave each other a chorus as we went passed as his kids seem to like my car more from the look on there faces bless em :D

 

And love that dumb valve sound kit be ideal for the van Hahaha

 

Not a fan of the Scooby ute :) But would be a better choice I think for the MX bike :) n

Link to comment
Share on other sites

Since I came over to the subaru way of thinking I was quite excited when I discovered the ute, I had seen couple of Brats that I would seriously consider

 

This one caught my eye a while back - the only thing I would have to check is if the length of the flat bed will let me get a full size crosser in or if it would be for pitbikes only

 

Brat_zpsb8cdbea8.jpg

 

Spec

1992 subaru brat with an impreza engine and running gear. Engine is a closed deck block with version 4 heads skimmed and checked steel head
gaskets JE pistons,steel rods, acl bearings, arp head stud kit, rcm oil pump, cosworth baffle plate
Type ra gearbox but does have all wiring for DCCD box in it ready to go

 

Custom made propshaft custom made anti roll bars custom made exhaust
Resprayed and under sealed
Defi dials oil temp oil pressure boost
Sti seats custom made interior panels
Engine covered about 5000 since built the rest of the ute has covered just over 2500 since it was stripped repainted and rebuilt

Link to comment
Share on other sites

Jay if you're already running a scooby then it's gotta be a holden for the MX's! Have the best of both worlds! I'm actually borrowing the Bathurst while my Cossie is being fixed - interesting back-to-back ;oD 

Link to comment
Share on other sites

not really anything i can add to whats already been added, so best of luck with the diag. however i will say my mate had a 911 turbo and he can assure you that the cosworth WILL give the 911 turbo a awsome battle on b-roads except when it comes to pot holes. and thats from the horses mouth

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support