Youngy

Nice one cheers people I will get that ordered

Can anyone tell me what the diameter is on my top pipe on my uk 2000 (99 plate) coz I want to fit a adapter for a water temp gauge

It looks like it's about 57mm and it looks a bit grubby but it does come up ok

I will check in a bit and let you know

Which bit is that coz all I know is it's 2 1/2in in diameter

I think it's 2 1/2 in with a 4in tip but sounds really good but I'm not sure on postage I thought no I could get a courier for about £12

Thanks but they haven't got any

Yeah it is and the new system sounds amazing

the stuff is like magic and I will always have some to hand

As above I need both drivers side doors for my uk 2000 1999 the paint code is 65c which is reddish blue I think so is there anyone breaking one thanks

As above Iv just fitted a full 3in stainless system so my cobra back box is up for grabs and it sounds brilliant it cost roughly £180 but I only want £50 but also it can come with standard down pipe and middle section both cats are ok £80 for all of it but it does need a clean location is Gravesend in Kent

I bought some gas plus spray and within minutes the nuts where off so who ever suggested that stuff thanks

Cheers for all the info Iv just bought some of them nuts and Iv got scoobyghost coming up probably Saturday so hopefully all gets sorted

They are on there good and I haven't got the proper tools to do it that's why I asked for help coz I don't want to knacker the bolts coz at the mo they are not rounded off

As above I need to remove my down pipe iv taken the top two off but having trouble with the rest so is there anyone in the Gravesend/Dartford area that could help out coz I haven't got the proper tools anyway but I will pay who ever can help thanks

I heard that about the injectors so that's something I don't have to change I'm just hoping I get about 330bhp out of it

Yeah I'm saving as we speak just still can't decide what map to go for coz I think it's already been done but the whole car is standard apart from a cobra back box but ATM I'm upgrading everything as Iv just bought a straight through decat exhaust and fuel pump Iv just got to get my injectors,fmic and a better turbo then off we go to the mappers then I will know what it's running and what mods have been done

My car is a 99 and has 70k miles so the engine is in very good condition and sounds good so I can run the boost higher that what it is now then

Very interesting but what boost can the turbo and engine handle in my car

If it has been mapped already how do I find out is there anything inside the ecu I can check

It's really smooth with no problems at all with no loss of power

all its got is a cobra back box,cone filter and the previous owner said it was mapped but I have no proof but it had the original boost controller and iv fitted a manual one and its still the same

as above my boost is all over the place because in first gear it will boost to 11 psi but in second it goes to 13 psi then the rest it goes to 15 psi is there a reason for this

iv just been looking into the eculab remap and it looks good so when I have put the new turbo and other bits on I will go get it done but thanks everyone for the info coz I really haven't got a clue about these cars

You got any pictures of what pipes go where