stants

Ah hairy muff, I don't really know that much about them I only have standard recirc in elbow & if I was to replace i'd get a forge like for like, not much use really haha

2nd the cobra comment, I have a turbo back resonated system, quiet enough not to **** people off in morning but once you get going it sounds good.

I take it you can't blank it off ?

Checked the cabin filter box today turns out there isn't a filter installed, I have all the box &pipework that is needed and it's attached to the hvac system ? Been reading on the Internets that the filter was just an option on the older models, can somone point me in the right direction of a replacement filter or part no for a blueprint one ? [emoji1]

Do you have a different i/c to what it's supposed to fit? I've seen the elbow on sti coolers I'd that helps

Thought I'd check the cabin filter, the airbox is there but no element,

I'm not clued up on new age, take a punt at possibly a spec c ?

Hmm nice looking bits there mate ☺

Have you tried having a look at their website/fitting guide ? http://www.turbosmartusa.com/instructions-downloads I know it's the us site but it can't be much different

Speak to Tlag if I remember he has/had a legacy converted

Not unless your sticking your leg over the centre console ☺ the seats are comfy you do sit quite high I swapped mine for a set of impreza fronts as you sit about an inch and a half lower

What hose mate ? I know one fits on the nipple at the top of the bov ?

330 in a classic will be plenty rapid, is he coming down Monday ?

I'm not completely sure but a fair few of the early cars had them, same with the old legacies all had closed blocks, specially with if it's an import you never know what's under the bonnet

Lol I've tried just about all the different ways using a makeshift setup from the clock feed, so I'm gonna give it one last go from a different source and see how taht goes, Sounds about normal level of drop there on the fuel gauge, I can have half a tank and drive home then it's 3/4 empty, thing is when you look in the tank there's loads left.

There will be slightly different parts and maybe a closed deck block if he's lucky, depending on the month of manufacture. So easier to get big power out of as you won't need to source a new block

May be worth giving www.importcarparts.co.uk a shout they might be able to source parts or put you onto someone who can

75 -90 is what you need, I presume they are the same but I'd double check

Which part of the gauge is the drop on ? Pt3 of my wiring fun, so I can only get the gauges to work if headlights are on, so ran a different acc feed still no luck thought about connecting the lighting curcit up to get it to change colour, now just stays orange, and you still need the lights on, checked the earth and what not, don't reply know where to look next ?

Is it an import Chris ?

Contact opie oils www.opieoils.co.uk they will advise you the best oil for the level of mods etc plus we get discount, most of us use varying grades of millers oils

Haha which one mate ? I have those you sent the other day can upload for you

You can get scoop delete kits, or if you want to keep scoop just get a bit of ally sheeting and make some louvre 's to let heat escape and water out

How big are the dogs ? If you had just a back seat guard you could get two collie sized ones in comfortably maybe three at a push, back seats down and you'd have space for all. Access may be an issue if they were infirm but it's not too high

Beat me to it ! If no ac just mark the belt tension screw slacken off and remove bottom alt bolt loosen the top one and rotate, if ac equipped you'll have to remove it as colin says