Jump to content

2008 JDM wing mirrors (smaller than UKs)


salsa-king
 Share

Recommended Posts

There's an eu directive that states the mirrors must be a certain size that corresponds with the car.

Something daft like, times the length and width of the body, divide by x and you'll come to the square area needed for the mirror.

Have you seen them in the rolls Royce phantom ?

I'd stuck them on if you don't like you can always shift them on

Link to comment
Share on other sites

just posted this on SN too..

 

 

started to clean them up tonight, also touched up a couple of stone chips.

 

20150412_191741_zpspuqz5djp.jpg

 

this is me offering it up and the same level as the ones on the car.

20150412_191821_zpsfbiclkrx.jpg

 

quite a bit smaller and more rounded design.

 

 

I'm a bit worried about fitting the, door panel off etc :(
Link to comment
Share on other sites

I resprayed the triangle bit that fits to the a pillar on mine.

You just need to take the door card off, remove the tweeter and that gives you access to the 3 bolts that hold the mirror to the a pillar. The only issue I had was that the multi plug didn't fit through the hole in the a pillar so I had to cut the wires. Refitting meant resoldering the wires back on to the multi plug.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support