salsa-king Posted April 12, 2015 Share Posted April 12, 2015 just picked these JDM mirrors up... still un decided as to fit them or not. what do you lot think? Quote Link to comment Share on other sites More sharing options...
Xander Posted April 12, 2015 Share Posted April 12, 2015 Got a photo of them installed on a car? -- I make Films and Website for people Quote Link to comment Share on other sites More sharing options...
Scooby Pete Posted April 12, 2015 Share Posted April 12, 2015 If you don't want them Salsa I'll have them off you. God knows why they used Forrester units on the UK Impreza's 1 Quote Link to comment Share on other sites More sharing options...
Scooby Pete Posted April 12, 2015 Share Posted April 12, 2015 Before after Quote Link to comment Share on other sites More sharing options...
Xander Posted April 12, 2015 Share Posted April 12, 2015 Look loads better, if they fold and everything so work the same I would say go for it. -- I make Films and Website for people Quote Link to comment Share on other sites More sharing options...
stants Posted April 12, 2015 Share Posted April 12, 2015 There's an eu directive that states the mirrors must be a certain size that corresponds with the car. Something daft like, times the length and width of the body, divide by x and you'll come to the square area needed for the mirror. Have you seen them in the rolls Royce phantom ? I'd stuck them on if you don't like you can always shift them on Quote Link to comment Share on other sites More sharing options...
salsa-king Posted April 12, 2015 Author Share Posted April 12, 2015 just posted this on SN too.. started to clean them up tonight, also touched up a couple of stone chips. this is me offering it up and the same level as the ones on the car. quite a bit smaller and more rounded design. I'm a bit worried about fitting the, door panel off etc :( Quote Link to comment Share on other sites More sharing options...
Scooby Pete Posted April 12, 2015 Share Posted April 12, 2015 I resprayed the triangle bit that fits to the a pillar on mine. You just need to take the door card off, remove the tweeter and that gives you access to the 3 bolts that hold the mirror to the a pillar. The only issue I had was that the multi plug didn't fit through the hole in the a pillar so I had to cut the wires. Refitting meant resoldering the wires back on to the multi plug. Quote Link to comment Share on other sites More sharing options...
Tidgy Posted April 12, 2015 Share Posted April 12, 2015 Pop up to clinic mate, sure kev can sort it easy enough 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.