HULKSCOOBY Posted June 11, 2015 Author Share Posted June 11, 2015 I think its a sensor, going to get some vac lines remove the T and put a straight through pipe! It was the rubber pipe from the intercool to dump valve :( Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted June 11, 2015 Share Posted June 11, 2015 Ah got ya. Quite a large pipe then. Just refer back to that pic showing the bracket of sensors. The top sensor is the only one that takes a manifold vac pipe. Quote Link to comment Share on other sites More sharing options...
HULKSCOOBY Posted June 11, 2015 Author Share Posted June 11, 2015 Cheers for your help mate, I owe you! Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted June 11, 2015 Share Posted June 11, 2015 That's what we are all here for [emoji4] let me know how you get on and give us a shout if anything else pops up. Quote Link to comment Share on other sites More sharing options...
stants Posted June 12, 2015 Share Posted June 12, 2015 Do you have the restrictor pill fitted ? Don't forget to take it out of the vac lines before you bin the old lot off Sent from my SM-G850F using Tapatalk Quote Link to comment Share on other sites More sharing options...
HULKSCOOBY Posted June 12, 2015 Author Share Posted June 12, 2015 I couldn't see one when i swapped the pipes over? Quote Link to comment Share on other sites More sharing options...
stants Posted June 12, 2015 Share Posted June 12, 2015 Should be a little brass pill a maybe 1cm long with a hole about a mm in the bottom hose if three port or near the turbo in the top hose on a two port Sent from my SM-G850F using Tapatalk Quote Link to comment Share on other sites More sharing options...
HULKSCOOBY Posted June 12, 2015 Author Share Posted June 12, 2015 Ok iv managed to get a pipe to get it going and moving however im finding that when it gets to 18-19psi it stutters almost as if fuel cut is coming in. How ever its running a gems ecu, it has a hks fuel cut defender on i think its set to stock could this becausing it to cut? Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted June 12, 2015 Share Posted June 12, 2015 It could be. Try to get everything back to standard and start again. Quote Link to comment Share on other sites More sharing options...
HULKSCOOBY Posted June 12, 2015 Author Share Posted June 12, 2015 Got the girlfriend up from london this weekend so think il struggle to get anything done ha. Have a look tonight! Quote Link to comment Share on other sites More sharing options...
HULKSCOOBY Posted June 13, 2015 Author Share Posted June 13, 2015 http://pages.ebay.com/link/?nav=item.view&id=261893413276&alt=web Is thia the right one for 3 port? Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted June 13, 2015 Share Posted June 13, 2015 I'm not sure what the internal diameter size for your car would be. That's the important bit. But yeah that's what you should have or will need. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.