lev1982 Posted January 22, 2016 Share Posted January 22, 2016 Hi guys, Joined a few days ago and the advice I have had is great. I have searched the forum a bit for this answer but no definite. I have a 1996 scooby wrx import lightweight chassis. It is on 15s and I have secured a set of 16s for it that will be on it next week. My question is what is the best wheel size to get for handling purposes. It's yet to be dyno but I would like to get it up to about 330hp Looking for ppl experience on this. I'm not after bigger wheels for looks etc so if 16s are good so am I. Thanks guys Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted January 22, 2016 Share Posted January 22, 2016 I'm on 205/50/16 and find the handling superb but a lot will be governed by tyre choice. If you go for a budget tyre with soft sidewalls you'll find a very boaty ride through corners. 1 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 22, 2016 Author Share Posted January 22, 2016 I'm probably gonna go with toyo. Used to use them on my m3 and loved them. No point in having a car like this and going budget on such an important part of the car. Went budget once years ago and ended up replacing them after about 2 weeks cause it changed the handling of the car so much. Looks like the 16s are it's new shoes then. 😀 thanks for the help. Scooby ghost. The 15s just scared me a little lol Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 22, 2016 Share Posted January 22, 2016 My brv had a set of 18's for a while , they ruined the ride and handling so he switched back to 17's . I've never run anything but 17's so couldn't say what the 16's are like . If you do intend on uprating the brakes to 4 pots on the front at a later date, make sure the 16's you buy will clear them [emoji6] If it's not broke .....upgrade it 😊 1 Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted January 22, 2016 Share Posted January 22, 2016 I have eagle gsd3 on at the minute and would always go back to them but they seem to have discontinued my size so found a reaosnably priced set of prizes T1R that I will go for. Heard toyos have soft sidewalls though? That's the only thing holding me back. 1 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 22, 2016 Author Share Posted January 22, 2016 I used to run 19s on my m3 so any suggestions on tyres then? Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 22, 2016 Share Posted January 22, 2016 I've got firestone firehawks on the front (which seem ok) And some "ying sing ditch finders" on the back as they were on the car when I got it and still have plenty of tread [emoji16] the back end steps out before the front atm (which I prefer ) but I'll probably stick some new firestones on the front when the ditch finders are done .As I don't seem to be scrubbing the corners off them as much as the previous kuhmo extradas A Whiteline rear arb is a worthwhile cheap handling upgrade to lessen body roll If it's not broke .....upgrade it 😊 2 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 22, 2016 Author Share Posted January 22, 2016 Thanks savage will see if any of my local dealers stock those. Quote Link to comment Share on other sites More sharing options...
oldschoolSTI Posted January 22, 2016 Share Posted January 22, 2016 215/45/17 Goodyear Eagle F1 Asymmetric 2 is what I'm running. Can't fault them. 1 Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted January 23, 2016 Share Posted January 23, 2016 Second that savage, rear arb is a must. Made a world of difference. 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 23, 2016 Share Posted January 23, 2016 I haven't tried loads of different tyres and I do tend to scrub Uber soft compound tyres out on the edges before I've really done any miles .So I normally only get middle compound and cost tyres tbh . I've had a look where I got them from and I think they were the sz90's on this page ...... http://www.mytyres.co.uk/cgi-bin/rshop.pl?dsco=110&cart_id=88296795.110.8868&sowigan=So&Breite=215&Quer=45&Felge=17&Speed=W&kategorie=6&Marke=&ranzahl=4&tyre_for=PKW&x_tyre_for=&suchen=Show%20tyres&sort_by=brand&rsmFahrzeugart=PKW&search_tool=standard&weiter=30..... They deliver to your door or tyre fitter of your choice .have a squint at the other ones on there to get a idea of cost and choice but bear in mind I don't know much about tyres [emoji23] If it's not broke .....upgrade it 😊 1 Quote Link to comment Share on other sites More sharing options...
Scoobydoobydan Posted January 23, 2016 Share Posted January 23, 2016 Hey loving the classic, I'm running 17" on my V1 Sti, tonnes of grip no issues with the strut braces etc helping with handling. 2 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 23, 2016 Author Share Posted January 23, 2016 Mine has the strut braces so that's one expense I haven't got. Yes once I hit the 280ish bhp mark I will be upgrading the stoppers. It has some quality discs on at the mo and when I do put her on the road it will only be town driving really. Once I have the few things sorted and tidied up that's when I want to go have a play at track days. That's when I will find out how much my !Removed! grabs the seat when using the brakes haha. The wheels are off my mates type ra and with 4 good tread tyres on only cost me £30 he upgraded to 17s so if I need a new set come brake upgrade time I haven't wasted any money. Thanks for the link savage will go look now. Tyres are a minefield. I went for vredestein on my m3 before the toyo not a cheap tyre at the time but it was like driving on ice with them almost killed me. More important almost killed my car. Rear arb? Sorry been out of the car world for a while. Anti roll bar? Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted January 23, 2016 Share Posted January 23, 2016 Yeah anti roll bar. If you want proxes T1R there are a couple on eBay 205/50/16 for £215ish and 205/55/16 £160ish. 1 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 23, 2016 Author Share Posted January 23, 2016 Wow mate love your classic. Hope i can get mine looking that good. I don't know what to do colour wise on mine. Keep it silver Ice white Or go with something you don't really see scoobys in just to be different. At the mo I am looking at white just because I like them looking like they should 😊 1 Quote Link to comment Share on other sites More sharing options...
Scoobydoobydan Posted January 23, 2016 Share Posted January 23, 2016 Colours for me would be white or the gun metal grey!! Looks lovely!!!! I'm getting the alloys done on mine ASAP as they were silver, and I sprayed them white to see what it was like and looks good, just need them done properly now so I can clean them better than in the pic above!!! Lol Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 23, 2016 Author Share Posted January 23, 2016 Thanks scoobyghost will go for the lower profile everytime. Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted January 23, 2016 Share Posted January 23, 2016 Same for me [emoji106] Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 23, 2016 Author Share Posted January 23, 2016 Ooooh gunmetal thanks for that I now have another few weeks of changing my ming haha 1 Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 23, 2016 Share Posted January 23, 2016 I went for polar black when I had the rotas refurbished But I've kept the plastics black If it's not broke .....upgrade it 😊 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 23, 2016 Author Share Posted January 23, 2016 I love the front mount intercooler but have been told that on lower bhp it can cause issues Quote Link to comment Share on other sites More sharing options...
savage bulldogs Posted January 23, 2016 Share Posted January 23, 2016 Yeah if your running sub 300hp (especially with a small tdo4) you can cause lag when fitting a fmic. As you've got a bigger core and about 4 mtrs of extra pipework to fill back up with boost before it reaches the inlet manifold. When running a bigger turbo and mapped correctly the fmic to tmic lag difference is minimal V3/v4 tmic's are good for 330hp ish before the heatsoak becomes a issue and you need a fmic [emoji6] If it's not broke .....upgrade it 😊 Quote Link to comment Share on other sites More sharing options...
lev1982 Posted January 23, 2016 Author Share Posted January 23, 2016 Cool. Thanks for the info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.