July 17, 20169 yr Had a strange noise on startup for a while now. This afternoon it stopped abruptly and when I looked the pulley had dropped right off. Anyone know if it`s a replacement pulley or just the bearings? Cheers Steve
July 17, 20169 yr I'd presume it's a new pulley needed as more than likely sheared off ? Sent from my SM-G930F using Tapatalk
July 17, 20169 yr Author Looks like the bearing seized and the bolt just unwound itself Sent from my SM-G925F using Tapatalk
July 17, 20169 yr I think if the idler bearing bolts are over tightened (not torqued down properly ) they can snap , so check to see if the bolt is in 1 piece . As you might need to extract the broken bit and buy a new bolt with the new idler bearing. If it's not broke .....upgrade it 😊
July 18, 20169 yr Author It`s being sorted today, both the idler and tensioner pullys come as a set and they are something which needs replacing occasionally .
July 29, 20169 yr Author Yep. It was the tensioner pully though.....my mistake. But I also will need the idler pulley pretty soon which I can't seem to find anywhere. Sent from my SM-G925F using Tapatalk
July 29, 20169 yr Author Tell tale sign Dave is the noise on startup. Sent from my SM-G925F using Tapatalk
Create an account or sign in to comment