Xitwoundz Posted August 31, 2016 Share Posted August 31, 2016 Ok so started getting a rasp under the scoob (which I have only had back from the garage a week after a few months waiting for the gearbox to be repaired) I was thinking they forgot to tighten it back up after replacing the gearbox. So popped round to a man with a ramp got it up in the air and found the below image. as you can see some prat has over tightened the bolts stopping any movement which has caused the welds to shear. Now my question is does anyone know why someone has dropped the size of the pipe work and increased it again after? I'm going to get this whole section removed and the size corrected will this cause me any issues? Quote Link to comment Share on other sites More sharing options...
stants Posted August 31, 2016 Share Posted August 31, 2016 My guess is that someone's had different parts of systems and 'made' them fit together ? Whats the diameterof the pipe on the left of the pic 3" ? Sent from my SM-G930F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sandals Posted August 31, 2016 Share Posted August 31, 2016 Those springs are tough... so it would've taken some effort to get them that tight!! Quote Link to comment Share on other sites More sharing options...
Martian Posted August 31, 2016 Share Posted August 31, 2016 Lol, ive only just sorted mine out, bit of a coincidence finding two exhaust bodge jobs so close together. Mine was a 2.5" reduced to a 2". The car felt a fair bit better after i removed it. Quote Link to comment Share on other sites More sharing options...
Xitwoundz Posted August 31, 2016 Author Share Posted August 31, 2016 1 hour ago, stants said: My guess is that someone's had different parts of systems and 'made' them fit together ? Whats the diameterof the pipe on the left of the pic 3" ? Sent from my SM-G930F using Tapatalk It's some cheap crap metal just under 3inch each side. Just looking through my paperwork and it says it has a 3.5inch magnex. Think someone is telling porkys 😂 49 minutes ago, Martian said: Lol, ive only just sorted mine out, bit of a coincidence finding two exhaust bodge jobs so close together. Mine was a 2.5" reduced to a 2". The car felt a fair bit better after i removed it. Must have been the same fitters 😝 Quote Link to comment Share on other sites More sharing options...
Tidgy Posted September 1, 2016 Share Posted September 1, 2016 Look like its been bodge repaired and the repair has failed. New exhaust time i'd say ;) Quote Link to comment Share on other sites More sharing options...
Gambit Posted September 3, 2016 Share Posted September 3, 2016 Could maybe get an exhaust place to correct them with a bit of work done. But shocking that. And yeah them spring things are hard had to cut mine off Quote Link to comment Share on other sites More sharing options...
Martian Posted September 5, 2016 Share Posted September 5, 2016 Quote And yeah them spring things are hard had to cut mine off The bolt sheared off on all of mine, just wouldnt come undone until it eventually just sheared. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.