2007 legacy gt spec b auto to manual conversion

[r666 gtb]

hi all im looking for some help and advice. i have a 2007 jdm gt spec c legacy that was an auto, im currently part way thru doing a sti 6 speed manual conversion and am a bit stick with locating a few wires in the gearbox loom. dose anyone have a pin out or wiring diagram of the gearbox loom plugs that are in the engine bay or evan better know what wires are the reverse lights and netural/park switch wires 

[savage bulldogs]

Not too clued up on legacy or auto stuff tbh but I think Reverse and neutral wires are the black and white plugs that sit on the passenger side of the box .

I had to swap those and the manual speedo drive from my 94sti  ty52 5 speed onto my 04 sti ppp 6 speed . In order to make everything work 

[r666 gtb]

hi cheers yh its very different on mine i just have 2 gray plugs 

 

[A-Rod]

You need to speak with Tim Farmer at SUBBUS. He told me that he has done a gearbox swap for a legacy not long ago along with an engine swap. I think he has been noted around forums since 2008 (that's the earliest I've seen his name around Subaru forums). Check out my thread as I was looking for a local garage and stumbled upon him. He's a nice bloke and I'm sure he'll answer your questions. I have an 09 3.0R Spec B and in order to get the best out of a turbo bolt on, I'd need a manual box and I just didn't want to get involved.