Jump to content

Gambit

Management
  • Posts

    21,015
  • Joined

  • Last visited

  • Days Won

    357

 Content Type 

Profiles

Forums

Events

Gallery

Store

Premium Membership Discounts

Subaru Videos

Subaru News

Everything posted by Gambit

  1. I did warn Steve it would happen haha [emoji1]
  2. Have a chat with BigD on here unless you just want white. Then clubshop for them. Mind you bigD can do different sizes too.
  3. Lottery win this friday I'd be up for it :D
  4. Not kidding lol that's had it's monies worth :D
  5. BigD might be able to do them but only printed.
  6. Yeah I see it was I should have phrased it better really :) but doubt be long for a few imports to come in. If money allowed I'd have one. :)
  7. Not my find so thanks to. Ryan85 and the Original poster. PLEASE MAKE SURE YOU KNOW YOUR PIN BEFORE YOU TRY THE ANTI KEY THEFT CODE - YOU NEED THE PIN TO START THE CAR! ----------------------------------------------------------------------------------------------------------------------- Standard user controls ----------------------------------------------------------------------------------------------------------------------- Ignition Must be ON, not on Accessory power 0 - Last Trigger Isolation --> Allows the alarm to ignore the last sensor that caused the alarm to sound. Effectively used to disable faulty sensor but still turn the alarm on 1 - Turns off the alarm arming tone for the next time used (if tones are set) 2 - Turns off the ultrasonic sensors for next time used 3 - Turns off the sensor prewarning feature for next time used 4 - Turns off the single and dual trigger sensors for next time used 5 - Turns off the ultrasonic, single and dual trigger sensors for next time used 6 - combination of 4 and 5 7 - switches safety lock on/off (so car locks as you turn on ignition) 8 - display battery voltage 9 - nothing * - toggles volume of prewarn beep To make the passenger door unlock at the same time as the driver door: Ensure ignition is off, driver door left open. Hold the lock and unlock buttons together for about 5 seconds (it will issue a beep) ----------------------------------------------------------------------------------------------------------------------- Super secret squirrel programming codes ----------------------------------------------------------------------------------------------------------------------- To use : Ignition must be off Reset to default settings: *17856*880# Auto arm with door locking 60 seconds after the last door has been closed, Note make sure keys arn't in the vehicle: *17856 wait for the beep *004*1# turns it on. everytime a door is opened it will beep twice to inform you that its active Auto arm without door locking 60 seconds after the last door has been closed: *17856 wait for the beep *003*1# turns it on. everytime a door is opened it will beep twice to inform you that its active door unlock/locking beeps: *17856 wait for the beep *000*1# turns the beep on when locking and unlocking although admittedly not very loud *17856 *002 * 0 or * 1 then # Turns on safety locking through the programming code (similar to pressing 7 in the user options) but with more options on lock timings and pulse *17856 *005 * 0 or * 1 then # Auto-Rearm & Relock (if the alarm is turned off but no doors are opened etc) *17856 *007 * 0 or * 1 then # Accessory Wire 4 Function Can be used for boot release upon button hold or can be configured to allow Remote Engine Start/Stop devices (such as turbo timers i guess). If you need more info please ask *17856 *008 * 0 or * 1 then # Accessory Wire 3 (Total Closure) Operation - on Arm *0 = “Timed”. A passive, timed negative output is provided on Acc. Wire 3, every time the system is armed, to operate Total Closure (Total Closure Time *121 must be adjusted from 0 to select the output period if required). When held on arming, TX button 1 still operates Panic. *1 = “Hold Down”. A negative output is provided on Acc. Wire 3 only whilst TX button 1 remains held on arming after 3 seconds, up to a maximum of 26seconds (Total Close Time *121 will not affect the output time) When *1 selected, panic can only be operated from optional 2 button TX NB: Only S30 & 34 models. * 0 (“Timed” & Panic) *17856 *009 * 0 or * 1 then # Extend Standard CDL Lock Pulse - On/Off (only when TX button 1 held) Can be used with the above or as an alternative total closure option, where the vehicle already has a total closure circuit that can be operated from the standard CDL lock connections. When switched on, the Std CDL Lock pulse is extended (second pulse in the case of double pulse settings) as long as the TX button remains pressed, up to a maximum of 26seconds. When *1 selected, panic can only be operated from optional 2 button TX * 0 (off) *17856 *010 * 0 or * 1 then # Arm/Disarm Indicator Flash - On/Off For both radio key and direct switched systems * 1 (on) *17856 *011 * 0 or * 1 then # Accessory Wire 8 Function - *0 = Internal Panic Circuit. Configures system to activate Panic Mode whilst an earth input is detected on this wire. *1 = Closed Loop Protection. Configures system to trigger when the circuit becomes open when armed. NB: Only S1, 4, 30, 32 & 34 models * 0 (Internal Panic) *17856 *012 * 0 or * 1 then # Positive Door Switch Input or Internal Panic Circuit *0 = Internal Panic Circuit. Configures system to activate Panic Mode whilst a 12v input is detected on this wire. *1 = Positive Door Switch. Configures system to trigger when the circuit becomes 12v when armed. NB: Only S12, 30, 32 & 34 models * 1( “+” Switch) *17856 *013 * 0 or * 1 then # Key Theft Protection - On/Off NB: Only S4, 30, 32 & 34 models * 0 (off) *17856 *014 * 0 or * 1 then # Accessory Wire 6 (Headlamp Illumination) Operation - *0 = Arm Only. Configures the timed output to occur only when the system is “actively” Armed (illumination does not occur when Auto-Arming or Auto- Rearming). *1 = Arm & Disarm. Configures the timed output to occur when the system is both “actively” Armed & Disarmed (illumination does not occur when Auto-Arming or Auto-Rearming). NB: Only S30, 32 & 34 models * 0 (Arm Only) *17856 *015 * 0 or * 1 then # Accessory Wire 1 Function - *0 = Alarm Armed Output. Negative output provided whilst the security system remains armed. *1 = Total Closure Output. Negative output on arming, this can be “timed” or on “hold down” adjustable using *008 and *121. Wire 1 then behaves and can be adjusted as Wire 3 would be if fitted. NB: Only S4 models *0 (Armed Output) *17856 *016 * 0 or * 1 then # Accessory Wire 2 Function - *0 = Aux Siren/Pager Output. Negative output provided whilst the security system is triggering. *1 = Total Open/Boot Release Output. Negative output on disarming, this can be “timed” or on “hold down” adjustable using *006 and *122. . Wire 2 then behaves and can be adjusted as Wire 4 would be if fitted. NB: Only S4 models Original source. http://www.gt86.org.uk/forums/topic/2846-gt86-alarm-unit-programming-codes/
  8. Not had a day off sick yet might need to fall ill ;)
  9. Might pinch that and put it in the how to section ;)
  10. Ouch what a ****** take it the **** didn't stop. hopefully not done ten alignments too. has he split the side wall that you can see ?
  11. Hi mate sorry to hear the about the first SVX :( But like the sound of the new rebuild :D
  12. All being well it will rain later be able to put a few laps down :) For anyone unsure what I mean http://uk.subaruownersclub.com/forums/topic/3529-top-gear-test-track-lap-times/
  13. Never looked at settings just installed it and logged in lol.
  14. Thought your's might have been different but least you got it sorted. :)
  15. I wouldn't pay for it either. But my screen is white and orange.
  16. Right they're back :) we have wet and dry boards up. And I've done as Dog has asked so we will go with the 2015 STI now. As normal no mods no tinkering with handling has to be done standard. Well paint can be added to the car :D but you know what I mean nothing that can alter the handling :D
  17. It's for your alarm mate :) if it's a sigma 30 I have these Manual https://drive.google.com/file/d/0B8TFZlCx15kTZlozYWtoUWFHUWc/view?usp=sharing Keypad codes https://drive.google.com/file/d/0B8TFZlCx15kTY2pBREdDMVZsem8/view?usp=sharing
  18. I'm hoping for bad weather for at least a week :D
  19. It's ok started putting it on the back of the mens public toilets for you ;) Enjoy Haha
×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Unread Content
  • Support