lev1982 Posted February 14, 2016 Author Posted February 14, 2016 Fuses are all good in both boxes. Sent from my SM-G920F using Tapatalk
GeoffLeggy Posted February 14, 2016 Posted February 14, 2016 Did you discount the crankshaft sensor? 1
lev1982 Posted February 14, 2016 Author Posted February 14, 2016 No faults on eml. How can I test it? Sent from my SM-G920F using Tapatalk
lev1982 Posted February 14, 2016 Author Posted February 14, 2016 Connecting the blocks under dash shows no faults. Would it do this if ecu was dead. Sent from my SM-G920F using Tapatalk
GeoffLeggy Posted February 14, 2016 Posted February 14, 2016 1111 No codes stored 11 Crankshaft position sensor (Don't confuse with above, usually when the crankshaft sensor if dodgy the thing won't start anyway) 1
GeoffLeggy Posted February 14, 2016 Posted February 14, 2016 This may or may not help. http://www.ebay.co.uk/gds/How-to-read-clear-fault-codes-on-Subaru-inc-Impreza-/10000000002365952/g.html 1
GeoffLeggy Posted February 14, 2016 Posted February 14, 2016 If there are no fault codes then not sure, sorry dude.
lev1982 Posted February 14, 2016 Author Posted February 14, 2016 Anyone got any ht leads for a v3/v4 lying about they want to part with. If that works will invest in a new set. Sent from my SM-G920F using Tapatalk
savage bulldogs Posted February 15, 2016 Posted February 15, 2016 I might have a working coil pack and ht leads for the v3/v4 in the man cave I'll check when I get home If it's not broke .....upgrade it 😊
lev1982 Posted February 15, 2016 Author Posted February 15, 2016 OK mate cheers Sent from my SM-G920F using Tapatalk
lev1982 Posted February 15, 2016 Author Posted February 15, 2016 Update. Just had someone look at car and strong smell of fuel when trying to start. Have been told an injector seal could have gone. Causing a massive over fuel. Gonna get the top off and check them. As well as drop out the spark plugs. Anyone heard of his before? Sent from my SM-G920F using Tapatalk
savage bulldogs Posted February 15, 2016 Posted February 15, 2016 Dud you disconnect the earth when having the welding done and Have you definitely got a spark ? Cos If you haven't got a spark and you have got fuel , it wouldn't be burning and it would smell rich . A blown injector ring would also give the same sort of symptoms but probably accompanied by a bit of popping and banging as it tries to fire on the other cylinders. If it's not broke .....upgrade it 😊
lev1982 Posted February 15, 2016 Author Posted February 15, 2016 Battery was removed from the car completely. Definately getting a spark. All four ht leads gave me a jump. ( lack of a spark plug spanner meant an extension bar and hand were used lol) have been told that maybe a pop from the exhaust while reversing on to ramps could have blown a seal and it is now too flooded to start. Sent from my SM-G920F using Tapatalk
Scoobyghost Posted February 15, 2016 Posted February 15, 2016 I once had an issue with a poorly fitted fmic pipe slipped from the silicon join. Car ran like **** but limped home then wouldn't start but stank of fuel. Eventually it fired up and ran like **** for a bit before running right again. It was my first impreza. I had no idea what I was doing and that car cost me a lot of money before I sold it on 😱😓
kayzarh Posted February 16, 2016 Posted February 16, 2016 No faults on eml. How can I test it? Sent from my SM-G920F using Tapatalk I posted some screenshots on how to test crankshaft and camshaft! Sent from my HTC One_M8 using Tapatalk
lev1982 Posted February 16, 2016 Author Posted February 16, 2016 No faults on eml. How can I test it?Sent from my SM-G920F using Tapatalk I posted some screenshots on how to test crankshaft and camshaft! Sent from my HTC One_M8 using Tapatalk Yes sorry mate done that and all good. Sent from my SM-G920F using Tapatalk
kayzarh Posted February 16, 2016 Posted February 16, 2016 No faults on eml. How can I test it?Sent from my SM-G920F using Tapatalk I posted some screenshots on how to test crankshaft and camshaft!Sent from my HTC One_M8 using Tapatalk Yes sorry mate done that and all good. Sent from my SM-G920F using Tapatalk Ok then we will move back to step 1 to test if the ecu is getting the right power and we will diagnose it according to the book Sent from my HTC One_M8 using Tapatalk
lev1982 Posted February 16, 2016 Author Posted February 16, 2016 Just popping out to get a new lead for my multimeter. Just closed car door on it grrr. Don't you just love it when small things keep happening lol. Sent from my SM-G920F using Tapatalk
kayzarh Posted February 16, 2016 Posted February 16, 2016 It happens, I snapped my intake to turbo pipe so I might have to pull the manifold again LOl Sent from my HTC One_M8 using Tapatalk 1
lev1982 Posted February 16, 2016 Author Posted February 16, 2016 Just took intercooler off and the y shape pipe underneath is fooked where it connects to turbo. Got a better seal but need a new one. Who ever fitted that wants shooting Sent from my SM-G920F using Tapatalk
Scoobyghost Posted February 16, 2016 Posted February 16, 2016 Possibly similar issue to what I had. After we reconnected all the pipework it took quite some cranking before it fired up again. Once it fired took some more time to clear through.
lev1982 Posted February 16, 2016 Author Posted February 16, 2016 Got someone coming to do a compression test tonight. I don't want to keep cranking the engine. Think I'm gonna have to bite the bullet and send it to garage. Sent from my SM-G920F using Tapatalk
savage bulldogs Posted February 16, 2016 Posted February 16, 2016 It does seem strange how it's stopped running without any symptoms beforehand . Have you had the cam covers off and checked the timing marks? If it's not broke .....upgrade it 😊
kayzarh Posted February 16, 2016 Posted February 16, 2016 Lev if you have the time we can help you through it; I'm against garages! Sent from my HTC One_M8 using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now