Youngy Posted July 22, 2016 Posted July 22, 2016 As above what injectors do I need to make around the 330bhp mark as Iv only got to get them and my fuel pump then it's off to get remapped at the beginning of September but also where is best to go to get it mapped in Kent area
savage bulldogs Posted July 22, 2016 Posted July 22, 2016 Yellow 440cc injectors will make that target with supporting mods 馃槈 If it's not broke .....upgrade it 馃槉
savage bulldogs Posted July 22, 2016 Posted July 22, 2016 Can't remember what version youngy's scooby is but if it's a v5/v6 phase 2 it will have yellows as standard . Previous to that only the v2 ,v3 and v4 sti's had yellows from the factory [emoji6] If it's not broke .....upgrade it 馃槉
GeoffLeggy Posted July 22, 2016 Posted July 22, 2016 Ok cool. Only asking because I have a set of yellows if @Youngy needed some.
Youngy Posted July 22, 2016 Author Posted July 22, 2016 I have a uk 2000 99 plate and I'm sure it has grey injectors but how much for your yellow ones
Youngy Posted July 22, 2016 Author Posted July 22, 2016 On 7/22/2016 at 9:46 AM, GeoffLeggy said: 拢30 delivered mate if you need. Expand Cheers mate if you still have them Wednesday I will send payment thanks
Youngy Posted July 22, 2016 Author Posted July 22, 2016 I'm sure mine has grey ones but I will double check just incase
GeoffLeggy Posted July 22, 2016 Posted July 22, 2016 On 7/22/2016 at 5:26 PM, Youngy said: Cheers mate if you still have them Wednesday I will send payment thanks Expand Yeah there not going anywhere
aucky Posted July 22, 2016 Posted July 22, 2016 are they top feeds you need,i have a set of blue injectors from a hawkeye,was told their 550cc have spare seals with them as well,dont no if they fit your car though,but am sure someone on here will :-)
Youngy Posted July 23, 2016 Author Posted July 23, 2016 I took a picture of my injectors so someone can tell me which ones they are
savage bulldogs Posted July 23, 2016 Posted July 23, 2016 Just seen your pic of the front mount intercooler on the other thread , nice work [emoji106] just stay off boost a bit untill it's mapped in [emoji6] I also noticed it's got a preface front bumper and the coilpack is in the centre of the inlet manifold. So it's probably a late v4 uk and will have grey 380 cc phase 1.5 injectors (good for 290 hp) . Cheapest option is to find some phase 2 yellow 440cc injectors from a v5 /v6 and buy some "phase adapters " total cost about 拢80 . Unless your 100% sure the second hand yellows are good, it might be worth getting them flow matched or cleaned (about 拢120) . You won't want to drive it far once you fit bigger injectors, cos it will be over fuelling, so keep it under 2.5k and fit em the day before the remap. [emoji6] If it's not broke .....upgrade it 馃槉
Youngy Posted July 24, 2016 Author Posted July 24, 2016 Yeah that's was I was going to do because Iv just bought a td05 turbo Iv ordered the fuel pump and geoffleggy has got the yellow injectors which I'm buying next Iv already fitted the straight through exhaust and intercooler which you know but all this will be fitted a couple of days before the remap and will only be driven to the mappers then hopefully all will be good
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now