Marcus04 Posted August 1, 2016 Share Posted August 1, 2016 Would I be able to just drop an ej25 in my blobeye? Quote Link to comment Share on other sites More sharing options...
Scoobyghost Posted August 2, 2016 Share Posted August 2, 2016 First thought is no because the wiring loom(possibly) and ecu will be different. Not sure to what extent. Quote Link to comment Share on other sites More sharing options...
LoganS Posted August 6, 2016 Share Posted August 6, 2016 Ej25 what? And what is currently in your blobeye? Quote Link to comment Share on other sites More sharing options...
Sandals Posted August 6, 2016 Share Posted August 6, 2016 1 hour ago, LoganS said: Ej25 what? And what is currently in your blobeye? EJ25 is the 2.5l lump, the blob originally comes with the 2l (EJ20) lump. Why are you wanting to put a 2.5 in? Quote Link to comment Share on other sites More sharing options...
Tidgy Posted August 6, 2016 Share Posted August 6, 2016 2.5 will be drive by wire so loom is different. You can swap the bottom ends but then your looking at alot of making sure things match, like head gasket thickness etc. Very good mod, but def a case of best to build/spec from crank up, mismatched parts and it will be crap. Also standard 2.5 its pretty !Removed! and suffers from head gasket and ring land failure. Built right they are prob the best subaru engine you can get though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.